Key Benefits:
Royal Decree 1630/1992 of 29 December 1992 laying down provisions for the free movement of construction products pursuant to Directive 89 /106/EC, as amended by Royal Decree 1328/1995 of 28 July 1995, establishes in Article 4, point 2, 2. the references of the Spanish rules "UNE" that are the transposition of harmonised standards will be published in the "Official Gazette of the State".
The European Commission has been taking decisions, from 1995 to the present, which have been published in the L series of the Official Journal of the European Union, establishing conformity assessment systems. with the essential requirements of Directive 89 /106/EEC of the families of products subject to Directive 89 /106/EEC.
In the Communications of the Commission, to give publicity to the availability of harmonized standards of the different families of products, the dates of entry into force and of the end of the period of coexistence are established concerning the use of the CE marking for the relevant products.
In the Order of 29 November 2001 of the Ministry of Science and Technology, references to harmonised standards, periods of co-existence, entry into force of the CE marking and notified bodies relating to a series of of construction products, and in its fifth article the Director General of Technology Policy was empowered to update or extend by resolution Annexes I, II and III of the same, competence transferred to the Directorate-General for Development Industrial, Ministry of Industry, Tourism and Trade in accordance with Royal Decree 1554/2004, On 25 June, transferred to the Directorate-General for Industry of the Ministry of Industry, Tourism and Trade in accordance with Royal Decree 438/2008 of 14 April, and transferred to the Directorate-General for Industry and Small and Medium-sized Enterprises pursuant to Royal Decree 344/2012 of 10 February.
Having published a new Communication from the Commission which recasts, updates and extends the previous Communications for the entry into force of the CE marking for various product families, the Commission has transposition into national law.
This resolution, as a continuation of the European provisions on this subject, will be applicable in the field of Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011 establishing harmonised conditions for the placing on the market of construction products and repealing Council Directive 89 /106/EEC.
In your resolute virtue:
First. Upgrade and extension.
Annexes I, II and III to the Order of 29 November 2001 for the publication of references to the UNE standards which are transposed into harmonised standards, as well as the period of coexistence and entry, are updated and extended. in force of the CE marking on several families of construction products.
Second. Effectiveness.
This resolution shall have effect from the day following that of its publication in the "Official State Gazette".
Madrid, November 23, 2015. -Director General of Industry and Small and Medium Enterprises, Victor Audera Lopez.
ANNEX I
Publication of titles and references of harmonised standards with European Regulation (EU) No 305/2011 of the European Parliament and of the Council
Commission Communication 2015 /C 378/03, in the framework of the implementation of Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011 laying down harmonised conditions for the the placing on the market of construction products and repealing Council Directive 89 /106/EEC (Official Journal of the European Union of 13 November 2015).
This Communication is a complete update of all the previous Communications to date in the Official Journal of the European Union, incorporating also the modifications and/or new products for the the entry into force of the CE marking is established.
ANNEX II
Harmonised rules with the European Regulation (EU) No 305/2011 of Construction Products
Previous note: This listing involves the recasting and updating of all the harmonised standards listed in previous ministerial orders and resolutions and also incorporates the new harmonised standards for which the CE marking has been established. Therefore, this listing overrides and replaces all previous listings.
Rule applicability date | End date of coexistence/entry into force period marked CE (*) | Evaluation and verification system of the constancy of the capabilities (**) | |||
---|---|---|---|---|---|
UNE-EN 1:1999 Stoves for liquid fuels, with vaporization burners and smoke evacuation conduits. UNE-EN 1:1999/A1:2008 | 1.1.2008 | 1.1.2009 | 3 | ||
UNE-EN 40-4: 2006 Columns and lighting bacles. Part 4: Requirements for reinforced concrete and reinforced concrete lighting columns and bacles. UNE-EN 40-4: 2006/AC: 2009 | 1.10.2006 1.1.2007 | 1.10.2007 1.1.2007 | 1 | ||
UNE-EN 40-5:2003 Columns and lighting bacles. Part 5: Requirements for steel lighting columns and bacles | 1.2.2003 | 1.2.2005 | 1 | ||
UNE-EN 40-6:2003 Columns and lighting bacles. Part 6: Requirements for aluminum lighting columns and bacles | 1.2.2003 | 1.2.2005 | 1 | ||
UNE-EN 40-7:2003 Columns and lighting bacles. Part 7: Requirements for columns and lighting bacles of fiber-reinforced polymeric composite materials. | 1.10.2003 | 1.10.2004 |
1 | ||
54-2:1997, adopted as UNE 23007-2:1998 Fire detection and alarm systems. Part 2: Control and Indication Equipment. EN 54-2:1997/A1:2006, adopted as UNE 23007-2:1998/1M: 2008 EN 54-2:1997/AC: 1999, adopted as UNE 23007-2:1998/ERRUM: 2004 |
1.1.2008 | 1.8.2009 | 1 | ||
UNE-EN 54-3:2001 Fire detection and alarm systems. Part 3: Fire alarm devices. Acoustic devices. UNE-EN 54-3/A1:2002 UNE-EN 54-3:2001/A2:2007 | 1.4.2003 1.3.2006 | 30.6.2005 1.6.2009 | 1 | ||
54-4:1997, adopted as UNE 23007-4:1998 Fire detection and alarm systems . Part 4: Power supply equipment. EN 54-4/AC: 1999, adopted as UNE 23007-4:1998/ERRATUM: 1999 EN 54-4/A1:2003, adopted as UNE 23007-4:1998/1m: 2003
| 1.10.2003 1.6.2005 1.10.2003 1.6.2007 | 1.8.2009 1.6.2005 1.8.2009 1.8.2009 | 1 | ||
UNE-EN 54-5:2001 Fire detection and alarm systems. Part 5: Heat detectors. Point detectors. UNE-EN 54-5/A1:2002 | 1.4.2003 | 30.6.2005 | 1 | ||
UNE-EN 54-7:2001 Fire detection and alarm systems. Part 7: Smoke detectors. Point detectors that work according to the principle of diffuse light, transmitted light or by ionization. UNE-EN 54-7/A1:2002 UNE-EN 54-7:2001/A2:2007 | 1.4.2003 1.5.2007 | 30.6.2005 1.8.2009 | 1 | ||
UNE-EN 54-10: 2002 Fire detection and alarm systems. Part 10: Flame detectors. Point detectors. UNE-EN 54-10: 2002/A1:2007 | 1.9.2006 | 1.9.2008 | 1 | ||
UNE-EN 54-11: 2001 Fire detection and alarm systems. Part 11: Manual alarm pulsers. UNE-EN 54-11: 2001/A1:2007 | 1.9.2006 | 1.9.2008 | 1 | ||
UNE-EN 54-12:2003 Fire detection and alarm systems. Part 12: Smoke detectors. Line detectors using an optical beam of light. | 1.10.2003 | 31.12.2005 | 1 |
||
UNE-EN 54-16:2010 Fire detection and alarm systems. Part 16: Control of alarm by voice and indicator equipment. | 1.1.2009 | 1.4.2011 | 1 |
||
UNE-EN 54-17:2007 Fire detection and alarm systems. Part 17: Short-circuit insulators. | 1.10.2006 | 1.12.2008 | 1 | ||
UNE-EN 54-18:2007 Fire detection and alarm systems. Part 18: Input/Output devices. | 1.10.2006 | 1.12.2008 | 1 | ||
UNE-EN 54-20:2007 Fire detection and alarm systems. Part 20: Humm aspiration detectors. UNE-EN 54-20:2007/AC: 2009 | 1.4.2007 1.8.2009 | 1.8.2009 1.8.2009 | 1 | ||
UNE-EN 54-21:2007 Fire detection and alarm systems. Part 21: Warning and warning transmission equipment. | 1.3.2007 | 1.6.2009 | 1 |
||
UNE-EN 54-23:2011 Fire detection and alarm systems. Part 23: Fire alarm devices. Visual alarm devices (VAD). | 1.12.2010 | 31.12.2013 | 1 | ||
UNE-EN 54-24:2010 Fire detection and alarm systems. Part 24: Components of the alarm systems by voice. Altmark. | 1.1.2009 | 1.4.2011 | 1 | ||
UNE-EN 54-25:2009 Fire detection and alarm systems. Part 25: Components using radio links. UNE-EN 54-25:2009/AC: 2012 | 1.1.2009 1.7.2012 | 1.7.2012 1.7.2012 | 1 | ||
UNE-EN 179:2009 Herrages for Building. Emergency devices powered by a handle or a push-button for evacuation paths. Testing requirements and methods. | 1.1.2009 | 1.1.2010 | 1 | ||
UNE-EN 197-1:2011 Cement. Part 1: Composition, specifications, and compliance criteria for common cements. | 1.7.2012 | 1.7.2013 | 1 + | ||
UNE-EN 295-1:2013 stoneware pipeline systems for sanitation. Part 1: Requirements for pipes, fittings, and gaskets. | 1.11.2013 | 1.11.2014 | 4 |
||
UNE-EN 295-4:2013 Sgres pipeline systems for sanitation. Part 4: Requirements for adapters, connectors, and flexible joins. | 1.11.2013 | 1.11.2014 | 4 | ||
UNE-EN 295-5:2013 Sgres pipeline systems for sanitation. Part 5: Requirements for perforated joints and pipes. | 1.11.2013 | 1.11.2014 | 4 |
||
UNE-EN 295-6:2013 Sgres pipeline systems for sanitation. Part 6: Requirements for the components of manholes and inspection cameras. | 1.11.2013 | 1.11.2014 | |||
UNE-EN 295-7:2013 stonepipe systems and accessories for sanitation. Part 7: Requirements for stoneware pipes and joints for hinch. | 1.11.2013 | 1.11.2014 | 4 | ||
UNE-EN 331:1998 Manually driven, spherical and male plug-in, for gas installations in buildings. UNE-EN 331:1999 ERRATUM UNE-EN 331:1998/A1:2011 | 1.9.2011 | 1.9.2012 | 1/3 | ||
UNE-EN 413-1:2011 Masonry cements. Part 1: Composition, specifications, and compliance criteria. | 1.2.2012 | 1.2.2013 | 1 + | ||
UNE-EN 416-1:2009 Radiant tubes suspended with monoburner using gaseous fuels for non-domestic use. Part 1: Security. | 1.12.2009 | 1.12.2010 | 2 + /4 | ||
UNE-EN 438-7:2005 High Pressure Decorative Laminates (HPL). Sheets based on thermostable resins (usually called laminates). Part 7: Compact laminates and HPL composite panels for external and internal wall and ceiling finishes. | 1.11.2005 | 1.11.2006 |
1/3/4 | ||
UNE-EN 442-1:2015 Radiators and Convectors. Part 1: Specifications and technical requirements. | 13.11.2015 | 13.11.2016 | 1/3/4 |
||
UNE-EN 450-1:2013 Concrete flyers for concrete. Part 1: Definitions, specifications, and compliance criteria. | 1.5.2013 | 1.5.2014 | 1 + | ||
UNE-EN 459-1:2011 Cales for construction. Part 1: Definitions, specifications, and compliance criteria. | 1.6.2011 | 1.6.2012 | 2 + | ||
UNE-EN 490:2012 Tejas and concrete pieces for roofs and wall cladding. Product specifications. UNE 127 100:1999 (2) | 1.8.2012 | 1.8.2012 | |||
1.7.2013 | 1.7.2013 | 3/4 | |||
UNE-EN 494:2013 Unwavy or ribbed cement ribs reinforced with fibers and their complementary pieces. Product specification and test methods. | 1.8.2013 | 1.8.2013 | 3/4 | ||
UNE-EN 516:2006 Prefabricated accessories for covers. Facilities for access to roofs. Gateways, steps, and stairs. | 1.11.2006 | 1.11.2007 | 3 | ||
UNE-EN 517:2006 Prefabricated accessories for covers. Security hooks. | 1.12.2006 | 1.12.2007 | 3 | ||
UNE-EN 520:2005 + A1:2010 Plastcast Plates. Definitions, specifications, and test methods. | 1.6.2010 | 1.12.2010 | 3/4 | ||
UNE-EN 523:2005 Steel strap for prestressed tendons. Terminology, specifications, quality control. | 1.6.2004 | 1.6.2005 | 4 | ||
UNE-EN 534:2007 + A1:2010 Bituminous corrugated plates. Product specifications and test methods. | 1.1.2011 | 1.1.2011 | 1/3/4 | ||
UNE-EN 544:2011 Bituminous plants with mineral and/or synthetic armor. Product specification and test methods. | 1.4.2012 | 1.4.2012 | 3/4 | ||
UNE-EN 572-9:2006 Glass for construction. Basic glass products. Sodium silicate glass. Part 9: Assessment of compliance/Product rule. | 1.9.2005 | 1.9.2006 | 1/3/4 |
||
UNE-EN 588-2:2002 Fibre Cement Piping for drainage and sanitation. Part 2: Man steps and inspection cameras. | 1.10.2002 | 1.10.2003 | 4 | ||
UNE-EN 598:2008 + A1:2009 Piping, accessories, and special parts of ductile cast iron and its joints for sanitation applications. Testing requirements and methods. | 1.4.2010 | 1.4.2011 | 4 | ||
UNE-EN 621:2010 Forced convection hot air generators, which work with gaseous fuels, for the heating of local non-domestic use, lower heat consumption, or 300 kW, without a fan for the aid of the feeding of the comerent air and/or the evacuation of the combustion products. | 1.8.2011 | 1.8.2011 | 2 + /4 | ||
UNE-EN 671-1:2013 Fixed fire fighting facilities. Systems equipped with hoses. Part 1: Fire Bocas outfitted with semi-irrigated hoses. | 1.3.2013 | 1.7.2013 | 1 | ||
UNE-EN 671-2:2013 Fixed fire fighting facilities. Systems equipped with hoses. Part 2: Fire Bocas outfitted with flat hoses. | 1.3.2013 | 1.7.2013 | 1 |
||
UNE-EN 681-1:1996 Elastomeric Boards. Requirements of the materials for pipe-sealing gaskets used in water pipes and in drainage. Part 1: Vulcanized Rubber. UNE-EN 681-1:1996/A1:1999 UNE-EN 681-1:1996/A2:2002 UNE-EN 681-1:1996/A3:2006 | 1.1.2003 1.1.2003 1.1.2003 1.1.2008 | 1.1.2009 1.1.2004 1.1.2004 1.1.2009 | 4 | ||
UNE-EN 681-2:2001 Elastomeric Boards. Requirements of the materials for pipe-sealing gaskets used in water pipes and in drainage. Part 2: thermoplastic elastomers. UNE-EN 681-2:2001/A1:2002 UNE-EN 681-2:2001/A2:2006 | 1.1.2003 1.1.2003 1.1.2010 | 1.1.2004 1.1.2004 1.1.2010 |
4 | ||
UNE-EN 681-3:2001 elastomeric boards. Requirements for materials for pipe-sealing gaskets used in water pipes and in drainage. Part 3: Cell materials of vulcanized rubber. UNE-EN 681-3:2001/A1:2002 UNE-EN 681-3:2001/A2:2006 | 1.1.2003 1.1.2003 1.7.2012 | 1.1.2004 1.1.2004 1.7.2012 |
4 | ||
UNE-EN 681-4:2001 Elastomeric Boards. Requirements of the materials for pipe-sealing gaskets used in water pipes and in drainage. Part 4: Shaped polyurethane sealing elements. UNE-EN 681-4:2001/A1:2002 UNE-EN 681-4:2001/A2:2006 | 1.1.2003 1.1.2003 1.7.2012 | 1.1.2004 1.1.2004 1.7.2012 |
4 | ||
UNE-EN 682:2002 Elastomeric Boards. Requirements for the joints materials used in pipes and fittings for the transport of gases and hydrocarbonates fluids. UNE-EN 682:2002/A1:2006 | 1.10.2002 1.7.2012 | 1.12.2003 1.7.2012 | 4 | ||
UNE-EN 771-1:2011 Parts Specifications for a masonry factory. Part 1: Cicide clay pieces. | 1.2.2012 | 1.2.2013 | 2 + /4 | ||
UNE-EN 771-2:2011 Parts specifications for masonry factory. Part 2: Silicocalcareous pieces. | 1.2.2012 | 1.2.2013 | 2 + /4 | ||
UNE-EN 771-3: 2011 Parts specifications for masonry factory. Part 3: Concrete blocks (dense and light aggregates). UNE 127 771-3:2008 (2) | 1.2.2012 | 1.2.2013 |
2 + /4 | ||
UNE-EN 771-4: 2011 Parts specifications for masonry factory. Part 4: Self-curing cell concrete blocks. | 1.2.2012 | 1.2.2013 | 2 + /4 |
||
UNE-EN 771-5: 2011 Parts specifications for masonry factory. Part 5: Artificial stone pieces. | 1.2.2012 | 1.2.2013 | 2 + /4 | ||
UNE-EN 771-6: 2012 Specification of masonry factory parts. Part 6: Natural stone pieces. | 1.2.2012 | 1.2.2013 | 2 + /3/4 | ||
UNE-EN 777-1:2009 Multi-burner suspended radiant tubes using gaseous fuels for non-domestic use. Part 1: System D, security. | 1.11.2009 | 1.11.2010 | 2 + /4 | ||
UNE-EN 777-2:2009 Multi-burner suspended radiant tubes using gaseous fuels for non-domestic use. Part 2: System E, security. | 1.11.2009 | 1.11.2010 | 2 + /4 | ||
UNE-EN 777-3:2009 Radiating tubes suspended with multiburners using gaseous fuels for non-domestic use. Part 3: System F, security. | 1.11.2009 | 1.11.2010 | 2 + /4 | ||
UNE-EN 777-4:2009 Radiating tubes suspended with multiburners using gaseous fuels for non-domestic use. Part 4: System H, security. | 1.11.2009 | 1.11.2010 | 2 + /4 | ||
UNE-EN 778:2010 Forced convection hot air generators, which use gaseous fuels, for home use local heating, lower rated calorific consumption or equal to 70 kW, without a fan for the aid of ingress of the air-fighting air and/or evacuation of the combustion products. | 1.8.2010 | 1.8.2011 | 2 + /4 | ||
UNE-EN 845-1:2014 Specifying auxiliary components for masonry factories. Part 1: Keys, moorings, pendants, brackets, and angles. | 8.8.2014 | 8.8.2015 | 3 |
||
UNE-EN 845-2:2014 Auxiliary component specifications for masonry factories. Part 2: Dintels. | 8.8.2014 | 8.8.2015 | 3 | ||
UNE-EN 845-3:2014 Auxiliary component specifications for masonry factories. Part 3: Steel mesh tendel joint armrests | 8.8.2014 | 8.8.2015 | 3 | ||
UNE-EN 858-1:2002 Separator systems for light liquids (for example oil and oil). Part 1: Principles of product design, characteristics and testing, marking and quality control. UNE-EN 858-1/A1:2005 | 1.9.2005 |
| 3/4 | ||
UNE-EN 877:2000 pipes and fittings, their joins, and special parts intended for the evacuation of water from buildings. Requirements, test methods and quality assurance. UNE-EN 877:2000/A1:2007 UNE-EN 877:2000/A1:2007/AC: 2008 | 1.1.2008 1.1.2008 1.1.2009 | 1.9.2009 1.9.2009 1.1.2009 |
4 | ||
UNE-EN 934-2:2010 + A1:2012 Additives for concretes, mortars, and pastes. Part 2: Additives for concretes. Definitions, requirements, compliance, marking and labeling. | 1.3.2013 | 1.9.2013 | 2 + |
||
UNE-EN 934-3:2010 + A1:2012 Additives for concretes, mortars, and pastes. Part 3: Additives for masonry mortars. Definitions, requirements, compliance, marking and labeling. | 1.3.2013 | 1.9.2013 | 2 + |
||
UNE-EN 934-4:2010 Additives for concretes, mortars, and pastes. Part 4: Additives for slurries for prestressed tendons. Definitions, specifications, compliance, marking and labeling. | 1.3.2010 | 1.3.2011 | 2 + | ||
UNE-EN 934-5:2009 Additives for concretes, mortars, and pastes. Part 5: Additives for projected concrete. Definitions, specifications, and compliance criteria. | 1.1.2009 | 1.1.2010 | 2 + |
||
UNE-EN 969:2009 pipes, fittings, and ductile cast fittings and their joints for gas pipelines. Testing requirements and methods. | 1.1.2010 | 1.1.2011 | 3 | ||
UNE-EN 997:2013 Inodoros and inode sets with embedded siphon. | 1.12.2012 | 1.6.2013 | 4 | ||
UNE-EN 998-1:2010 Masonry mortars specifications. Part 1: Morterers for Revoked and Lacklustre. | 1.6.2011 | 1.6.2012 | 4 | ||
UNE-EN 998-2:2012 Specifications for masonry mortars. Part 2: Masonry for masonry. | 1.6.2011 | 1.6.2012 | 2 + /4 | ||
UNE-EN 1013:2013 + A1:2014 translucent, single-layer translucent plastic plates for indoor and outdoor decks, walls, and ceilings. Testing requirements and methods. | 10.7.2015 | 10.7.2015 | 1/3/4 | ||
UNE-EN 1020:2010 Forced convection hot air generators, which work with gaseous fuels, for the heating of local non-domestic use, lower heat consumption, or equal to 300 kW, which incorporate a fan for the aid of the comerent air supply and/or the evacuation of combustion products. | 1.8.2010 | 1.8.2011 | 2 + /4 | ||
UNE-EN 1036-2:2009 Glass for Building. Silver-coated glass mirrors for internal use. Part 2: Evaluation of compliance; product standard. | 1.1.2009 | 1.1.2010 | 1/3/4 |
||
UNE-EN 1051-2:2008 Glass for building. Glass blocks and glass pavings. Part 2: Assessment of compliance. | 1.1.2009 | 1.1.2010 | 1/3/4 | ||
UNE-EN 1057:2007 + A1:2010 Copper and copper alloys. Round copper tubes, seamless, for water and gas in sanitary and heating applications. | 1.12.2010 | 1.12.2010 | 1/3/4 | ||
UNE-EN 1090-1:2011 + A1:2012 Execution of steel and aluminum structures. Part 1: Requirements for the conformity assessment of the structural components. | 1.9.2012 | 1.7.2014 | 2 + | ||
UNE-EN 1096-4:2005 Glass for Building. Layer glass. Part 4: Compliance Assessment/Product Standard. | 1.9.2005 | 1.9.2006 | 1/3/4 |
||
UNE-EN 1123-1:2000 Hot-galvanized steel tube and accessories longitudinally with couplable sleeve for wastewater channeling. Part 1: Requirements, testing, quality control. UNE-EN 1123-1:2000/A1:2005 | 1.6.2005 | 1.6.2006 |
4 | ||
UNE-EN 1124-1:2000 Stainless steel tubes and fittings longitudinally welded, with couplable sleeve for Waste water channelling. Part 1: Requirements, testing, quality control. UNE-EN 1124-1:2000/A1:2005 | 1.6.2005 | 1.6.2006 |
4 | ||
UNE-EN 1125:2009 Building hardware. Anti-panic devices for emergency exits actuated by a horizontal bar. Testing requirements and methods. | 1.1.2009 | 1.1.2010 | 1 | ||
UNE-EN 1154:2003 Building hardware. Door-controlled locking devices. Test requirements and methods. UNE-EN 1154 :2003/AC: 2006 | 1.10.2003 1.1.2010 | 1.10.2004 1.1.2010 | 1 | ||
UNE-EN 1155:2003 Herrages for Building. Electromagnetic retaining devices for batient doors. Test requirements and methods. UNE-EN 1155 :2003/AC: 2006 | 1.10.2003 1.1.2010 | 1.10.2004 1.1.2010 | 1 | ||
UNE-EN 1158:2003 Herrages for Building. Door coordination devices. Test requirements and methods. UNE-EN 1158 :2003/AC: 2006 | 1.10.2003 1.6.2006 | 1.10.2004 1.6.2006 | 1 | ||
UNE-EN 1168:2006 + A3:2012 Concrete precast products. Alveolar plates. | 1.7.2012 | 1.7.2013 | 2 + | ||
UNE-EN 1279-5:2006 + A2:2010 Glass for Building. Insulating glass units. Part 5: Assessment of compliance. | 1.2.2011 | 1.2.2012 | 1/3/4 | ||
UNE-EN 1304:2006 Clay tiles cooked for discontinuous placement. Product definitions and specifications. UNE 136 020:2004 (2) | 1.2.2006 | 1.2.2007 | |||
UNE-EN 1317-5:2008 + A2:2012 Road Containment Systems. Part 5: Product requirements and conformity assessment for vehicle containment systems. | 1.1.2013 | 1.1.2013 | 1 | ||
1.10.2010 | 1.10.2011 | 2 + /4 | |||
UNE-EN 1337-3:2005 Structural supports. Part 3: elastomeric supports. | 1.1.2006 | 1.1.2007 | 1/3 | ||
UNE-IN 1337-4:2005 Structural Support. Part 4: Roll support. UNE-EN 1337-4:2005/AC: 2007 | 1.2.2005 1.1.2008 | 1.2.2006 1.1.2008 | 1/3 | ||
UNE-EN 1337-5:2006 Structural Supports. Part 5: Support "pot". | 1.1.2006 | 1.1.2007 | 1/3 | ||
UNE-TABLE 1337-6:2005 Structural supports. Part 6: Oscillators. | 1.2.2005 | 1.2.2006 | 1/3 | ||
UNE-IN 1337-7:2004 Structural Support. Part 7: cylindrical and spherical PTFE supports. | 1.12.2004 | 1.6.2005 | 1/3 | ||
UNE-EN 1337-8:2009 Structural supports. Part 8: Support and lock supports. | 1.1.2009 | 1.1.2010 | 1/3 | ||
UNE-EN 1338:2004 Concrete Adoquines. Test specifications and methods. UNE-EN 1338 :2004/AC: 2006 UNE 127 338:2007 (2) | 1.3.2004 1.1.2007 | 1.3.2005 1.1.2007 | 4 | ||
UNE-EN 1339:2004 Concrete Tiles. Test specifications and methods. UNE-EN 1339 :2004/AC: 2006 UNE 127 339:2012 (2) | 1.3.2004 1.1.2007 | 1.3.2005 1.1.2007 | 4 | ||
UNE-EN 1340:2004 Precast concrete kerbs. Test specifications and methods. UNE-EN 1340 :2004/ERRATUM: 2007 UNE 127 340:2006 (2) | 1.2.2004 1.1.2007 | 1.2.2005 1.1.2007 | 4 | ||
UNE-EN 1341:2013 Natural stone tiles for use as pavement outside. Testing requirements and methods. | 1.9.2013 | 1.9.2013 | 4 | ||
UNE-EN 1342:2013 Natural stone Adoquines for use as exterior pavement. Testing requirements and methods. | 1.9.2013 | 1.9.2013 | 4 | ||
UNE-EN 1343:2013 Natural stone borders for use as exterior pavement. Testing requirements and methods. | 1.9.2013 | 1.9.2013 | 4 | ||
UNE-EN 1344:2015 Arcidal clay Adoquines. Test specifications and methods. | 8.8.2014 | 8.8.2016 | 1/3/4 | ||
UNE-EN 1423:2013 Horizontal Road Signalling Materials. Post-mixing materials. Glass microspheres, anti-slip aggregates and mixtures of both. UNE-EN 1423 :2013/AC: 2013 | 1.11.2012 1.7.2013 |
1.11.2012 1.7.2013 | 1 | ||
UNE-EN 1433:2003 drain channels for circulation zones used by pedestrians and vehicles. Classification, design and test requirements, marking and conformity assessment. UNE-EN 1433:2003/A1:2005 | 1.8.2003 1.1.2006 | 1.8.2004 1.1.2006 | 3 | ||
UNE-EN 1457-1:2013 Chimneys. Clay or ceramic smoke ducts. Part 1: Requirements and test methods for use in dry conditions. | 1.11.2012 | 1.11.2013 | 2 + | ||
1.11.2012 | 1.11.2013 | 2 + | |||
UNE-EN 1463-1:2010 Horizontal Road Signalling Materials. Retroreflective captafaros. Part 1: Initial features. | 1.1.2010 | 1.1.2011 | 1 | ||
UNE-EN 1469:2005 Natural Stone. Plates for wall coverings. Requirements. | 1.7.2005 | 1.7.2006 | 3/4 | ||
UNE-EN 1504-2:2005 Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and conformity assessment. Part 2: Systems for surface protection. | 1.9.2005 | 1.1.2009 | 1/2 + /3/4 | ||
UNE-EN 1504-3:2006 Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and conformity assessment. Part 3: Structural and nonstructural repair. | 1.10.2006 | 1.1.2009 | 1/2 + /3/4 |
||
UNE-EN 1504-4:2005 Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and conformity assessment. Part 4: Structural adhesion. | 1.9.2005 | 1.1.2009 | 1/2 + /3/4 | ||
UNE-EN 1504-5:2004 Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and conformity assessment. Part 5: Concrete injection products and systems. | 1.10.2005 | 1.1.2009 | 2 + /4 |
||
UNE-EN 1504-6:2007 Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and conformity assessment. Part 6: Steel armor attachments. | 1.6.2007 | 1.1.2009 | 1/2 + /3/4 | ||
UNE-EN 1504-7:2007 Products and systems for protection and repair of concrete structures-Definitions, requirements, quality control and conformity assessment. Part 7: Protection against armor corrosion. | 1.6.2007 | 1.1.2009 | 2 + /4 |
||
UNE-EN 1520: 2011 Prefabricated light-arid reinforced concrete components with open structure with structural and non-structural armor. | 1.1.2012 | 1.1.2013 | 2 + /4 | ||
UNE-EN 1748-1-2:2005 Glass for Building. Special commodities. Part 1-2: Borosilicate glass. Conformity assessment/Product rule. | 1.9.2005 | 1.9.2006 | 1/3/4 | ||
UNE-EN 1748-2-2:2005 Glass for Building. Special commodities. Part 2-2: Vitrocerámicas. Conformity assessment/Product rule. | 1.9.2005 | 1.9.2006 | 1/3/4 | ||
UNE-EN 1806:2008 Chimneys. Blocks for pipes of clay or ceramic smoke for simple wall chimneys. Testing requirements and methods. | 1.5.2007 | 1.5.2008 | 2 + | ||
UNE-EN 1825-1:2005 Fat Separators. Part 1: Principles of design, functional characteristics, testing, marking and quality control. UNE-EN 1825-1:2005/AC: 2006 | 1.9.2005 1.1.2007 | 1.9.2006 1.1.2007 | 3/4 | ||
UNE-EN 1856-1:2010 Chimneys. Requirements for metal fireplaces. Part 1: Modular fireplaces. | 1.3.2010 | 1.3.2011 | 2 + /4 | ||
UNE-EN 1856-2:2010 Chimneys. Requirements for metal fireplaces. Part 2: Interior pipelines and metal junction ducts. | 1.3.2010 | 1.3.2011 | 2 + |
||
UNE-EN 1857:2013 Chimneys. Components. Concrete inner ducts. | 1.1.2011 | 1.1.2012 | 2 + | ||
UNE-EN 1858:2011 + A1:2011 Chimneys. Components. Concrete smoke duct blocks. | 1.4.2012 | 1.4.2013 | 2 + | ||
UNE-EN 1863-2:2005 Glass for Building. Thermoset sodocalcium silicate glass. Part 2: Compliance Assessment/Product Standard. | 1.9.2005 | 1.9.2006 | 1/3/4 |
||
UNE-EN 1873:2006 Prefabricated accessories for covers. Individual lucernaries in plastic materials. Product specification and test methods. | 1.10.2006 | 1.10.2009 | 1/3/4 | ||
UNE-EN 1916:2008 Tubes and complementary pieces of mass concrete, reinforced concrete and concrete with steel fiber. UNE 127 916:2014 (2) | 1.8.2003 |
| 4 | ||
UNE-EN 1917:2008 Record Pozos and Inspection Chambers mass concrete, reinforced concrete and concrete with steel fibres. UNE 127 917:2015 (2) | 1.8.2003 | 1.1.2009 | 4 | ||
UNE-EN 1935:2002 Building hardware. Single-axis hinges. Test requirements and methods. UNE-EN 1935 :2002/AC: 2004 | 1.10.2002 1.1.2007 | 1.12.2003 1.1.2007 | 1 | ||
UNE-EN 10025-1:2006 Hot-rolled products, of non-alloy steel, for general-purpose metal constructions. Part 1: Technical conditions of supply. | 1.9.2005 | 1.9.2006 | 2 + | ||
UNE-EN 10088-4:2010 Inoxidable Azeros. Part 4: Technical conditions of supply for corrosion resistant sheets and bands for use in construction. | 1.2.2010 | 1.2.2011 | 2 + | ||
UNE-EN 10088-5:2010 Unoxidizable Azeros. Part 5: Technical conditions of supply for bars, wire rod, wire, profiles, and shiny corrosion resistant steel products for construction purposes. | 1.1.2010 |
1.1.2011 | 2 + | ||
UNE-EN 10210-1:2007 Hollow Profiles for Construction hot finishes, of non-alloy steel of fine grain. Part 1: Technical conditions of supply. | 1.2.2007 | 1.2.2008 | 2 + | ||
UNE-EN 10219-1:2007 Hollow Profiles For Welded, Cold-shaped, Non-alloy Steel and Fine-grained Steel. Part 1: Technical conditions of supply. | 1.2.2007 | 1.2.2008 | 2 + | ||
UNE-EN 10224:2003 Steel tubes and fittings for the transport of aqueous liquids, including water intended for human consumption. Technical provisioning conditions. UNE-EN 10224:2003/A1:2006 | 1.4.2006 | 1.4.2007 | |||
UNE-EN 10255:2005 + A1:2008 Non-alloy steel tubes suitable for welding and threading. Technical provisioning conditions. | 1.1.2010 | 1.1.2011 | 3/4 | ||
UNE-EN 10311:2006 Juntas for connection of steel pipes and fittings for the transport of aqueous liquids including water for human consumption. | 1.3.2006 | 1.3.2007 | |||
1.4.2006 | 1.4.2007 | ||||
UNE-EN 10340:2008 moulded zeros for structural uses. UNE-EN 10340 :2008/AC: 2008 | 1.1.2010 1.1.2010 | 1.1.2011 1.1.2010 | 2 + | ||
UNE-EN 10343:2010 Azeros for mettle and returned for use in construction. Technical provisioning conditions. | 1.1.2010 | 1.1.2011 | 2 + | ||
UNE-EN 12004:2008 + A1:2012 Ceramic tile adhesives. Requirements, conformity assessment, classification and designation. | 1.4.2013 | 1.7.2013 | 3 | ||
UNE-EN 12050-1:2001 Waste water elevators for buildings and installations. Principles of construction and testing. Part 1: Waste water elevators containing fecal materials. | 1.11.2001 | 1.11.2002 | |||
UNE-EN 12050-2:2001 Waste water elevators for buildings and installations. Principles of construction and testing. Part 2: Waste water elevators that do not contain fecal materials. | 1.10.2001 | 1.10.2002 | |||
UNE-EN 12050-3:2001 Waste water elevators for buildings and installations. Principles of construction and testing. Part 3: Water-raising plants containing fecal materials for limited applications. | 1.10.2001 | 1.10.2002 |
3 | ||
UNE-EN 12050-4:2001 Waste water elevators for buildings and installations. Principles of construction and testing. Part 4: Retaining valves for wastewater that do not contain fecal materials and for wastewater containing fecal materials. | 1.10.2001 | 1.10.2002 | 3 | ||
UNE-EN 12057:2005 Natural stone products. Platelets. Requirements. | 1.9.2005 | 1.9.2006 | 3/4 | ||
UNE-EN 12058:2005 Natural stone products. Floor tiles and stairs. Requirements. | 1.9.2005 | 1.9.2006 | 3/4 | ||
UNE-EN 12094-1:2004 Fixed fire fighting systems. Components for extinguishing systems by means of gaseous agents. Part 1: Requirements and test methods for automatic and electrical control and delay devices. | 1.2.2004 | 1.5.2006 |
1 | ||
UNE-EN 12094-2:2004 Fixed fire fighting systems. Components for extinguishing systems by means of gaseous agents. Part 2: Requirements and test methods for non-electrical control and delay devices. | 1.2.2004 | 1.5.2006 |
1 | ||
UNE-EN 12094-3:2003 Fixed fire fighting systems. Components for extinguishing systems by means of gaseous agents. Part 3: Requirements and test methods for manual firing and strike devices. | 1.1.2004 | 1.9.2005 | 1 | ||
UNE-EN 12094-4:2005 Fixed fire fighting systems. Components for extinguishing systems by means of gaseous agents. Part 4: Requirements and test methods for the valve assemblies of the high-pressure containers and their actuators. | 1.5.2005 | 1.8.2007 | 1 | ||
UNE-EN 12094-5:2007 Fixed fire fighting systems. Components for extinguishing systems by means of gaseous agents. Part 5: Requirements and test methods for high and low pressure directional valves and their actuators for CO | 1.2.2007 | 1.5.2009 | 1 | ||
UNE-EN 12094-6:2007 Fixed Fire Fight Systems. Components for extinguishing systems by means of gaseous agents. Part 6: Testing requirements and methods for non-electrical abortion devices for CO2 | 1.2.2007 | 1.5.2009 |
1 | ||
UNE-EN 12094-7:2001 Fixed Fire Extinction Systems. Components for extinguishing systems by means of gaseous agents. Part 7: Requirements and test methods for diffusers for CO2systems UNE-EN 12094-7:2001/A1:2005 | 1.10.2001 1.11.2005 | 1.4.2004 1.11.2006 | 1 | ||
UNE-EN 12094-8:2007 Fixed fire fighting systems. Components for extinguishing systems by means of gaseous agents. Part 8: Requirements and test methods for connectors. | 1.2.2007 | 1.5.2009 | 1 |
||
UNE-EN 12094-9:2003 Fixed fire fighting systems. Components for extinguishing systems by means of gaseous agents. Part 9: Requirements and test methods for special fire detectors. | 1.1.2004 | 1.9.2005 | 1 | ||
UNE-EN 12094-10:2004 Fixed fire fighting systems. Components for extinguishing systems by means of gaseous agents. Part 10: Requirements and test methods for presostats and manometers. | 1.2.2004 | 1.5.2006 | 1 | ||
UNE-EN 12094-11:2003 Fixed fire fighting systems. Components for extinguishing systems by means of gaseous agents. Part 11: Requirements and test methods for mechanical weighing devices. | 1.1.2004 | 1.9.2005 | 1 | ||
UNE-EN 12094-12:2004 Fixed fire extinguishing systems. Components for extinguishing systems by means of gaseous agents. Part 12: Requirements and test methods for pneumatic alarm devices. | 1.1.2004 | 1.9.2005 | 1 | ||
UNE-EN 12094-13:2001 Fixed fire fighting systems. Components for extinguishing systems by means of gaseous agents. Parte13: Requirements and test methods for check valves and valves against return. UNE-EN 12094-13/AC: 2002 | 1.1.2002 1.1.2010 | 1.4.2004 1.1.2010 | 1 | ||
UNE-EN 12101-1:2007 Systems for the control of smoke and heat. Part 1: Specifications for smokescreens. Test requirements and methods. UNE-EN 12101-1:2007/A1:2007 | 1.6.2006 1.12.2006 | 1.9.2008 1.9.2008 1.9.2008 | 1 | ||
UNE-EN 12101-2:2004 Systems for the control of smoke and heat. Part 2: Specifications for natural smoke extraction and heat extraction aerators. | 1.4.2004 | 1.9.2006 | 1 | ||
UNE-EN 12101-3:2002 Hum and heat control systems. Part 3: Specifications for exhaust and mechanical heat extractors. UNE-EN 12101-3:2002/AC: 2006 | 1.4.2004 1.1.2006 | 1.4.2005 1.1.2006 | 1 | ||
UNE-EN 12101-6:2006 Systems for smoke and heat control. Part 6: differential pressure systems. Teams. | 1.4.2006 | 1.4.2007 | 1 | ||
UNE-EN 12101-7:2013 Systems for control of smoke and heat. Part 7: Sections of smoke ducts. | 1.2.2012 | 1.2.2013 | 1 | ||
UNE-EN 12101-8:2015 Systems for control of smoke and heat. Part 8: Humm control doors. | 1.2.2012 | 1.2.2013 | 1 | ||
UNE-EN 12101-10:2007 Humm and heat control systems. Part 10: Power supply. | 1.10.2006 | 1.5.2012 | 1 | ||
UNE-EN 12150-2:2005 Glass for Building. Thermally tempered sodocalcium silicate glass. Part 2: Conformity Assessment/Product Standard. UNE-EN 12150-2:2005 ERRATUM: 2011 | 1.9.2005 | 1.9.2006 | 1/3/4 | ||
UNE-EN 12209:2004 Building hardware. Locks and latches. Locks, latches and mechanical lockers. Testing requirements and methods. UNE-EN 12209: 2004/AC: 2008 | 1.12.2004 1.6.2006 | 1.6.2006 1.6.2006 1.6.2006 | 1 | ||
UNE-EN 12259-1:2002 Fire Protection. Fixed fire control systems. Components for spray systems and pulverized water. Part 1: Automatic Rocers. UNE-EN 12259-1:2002/A2:2005 UNE-EN 12259-1:2002/A3: 2007 | 1.4.2002 1.3.2005 1.11.2006 | 1.9.2005 1.3.2006 1.11.2007 |
1 | ||
UNE-EN 12259-2:2000 Fire Protection. Fixed fire control systems. Components for spray systems and pulverized water. Part 2: Wet pipe alarm valve assemblies and delay cameras. UNE-EN 12259-2:2000/A1:2001 UNE-EN 12259-2:2000/A2: 2007 UNE-EN 12259-2:2000/AC: 2002 | 1.1.2002 1.9.2006 1.6.2005 | 1.8.2007 1.8.2007 1.6.2005 | 1 | ||
UNE-EN 12259-3:2001 Fire Protection. Fixed fire control systems. Components for spray systems and pulverized water. Part 3: Alarm valve assemblies for dry pipe systems. UNE-EN 12259-3:2001/A1:2001 UNE-EN 12259-3:2001/A2:2007 | 1.1.2002 1.9.2006 | 1.8.2007 1.8.2007 | 1 | ||
UNE-EN 12259-4:2000 Protection fire. Fixed fire control systems. Components for spray systems and pulverized water. Part 4: Hydromechanical alarms. UNE-EN 12259-4:2000/A1:2001 | 1.1.2002 | 1.4.2004 | 1 | ||
UNE-EN 12259-5:2003 Fire Protection. Fixed fire control systems. Components for spray systems and pulverized water. Part 5: Water flow detectors. | 1.7.2003 | 1.9.2005 | 1 | ||
UNE-EN 12271:2007 Surface Coatings. Requirements. | 1.1.2008 | 1.1.2011 |
2 + | ||
UNE-EN 12273:2009 Bituminous Lechads. Specifications. | 1.1.2009 | 1.1.2011 |
2 + | ||
UNE-EN 12285-2: 2005 Workshop manufactured steel tanks. Part 2: cylindrical, single-wall or double-walled horizontal tanks for the above-ground storage of flammable and non-flammable liquid water contaminants. UNE-EN 12285-2: 2005 ERRATUM: 2006 | 1.1.2006 | 1.1.2008 | 1/3/4 | ||
UNE-EN 12326-1:2015 Slate and natural stone products for rooftops and Discontinuous coatings. Part 1: Product specification. | 13.2.2015 | 13.2.2016 | 3/4 | ||
UNE-EN 12337-2:2006 Glass for building. Chemically hardened sodocalcium silicate glass. Part 2: Compliance Assessment/Product Standard. | 1.9.2005 | 1.9.2006 | 1/3/4 |
||
UNE-EN 12352:2007 Traffic regulation equipment. Hazard warning and beacon light devices. | 1.2.2007 | 1.2.2008 | 1 | ||
UNE-EN 12368:2008 Traffic Control Teams. Semaphore heads. | 1.2.2007 | 1.2.2008 | 1 | ||
UNE-EN 12380:2003 Pressure balancing valves for drain systems. Requirements, test methods, and conformity assessment. | 1.10.2003 | 1.10.2004 | 4 | ||
UNE-EN 12446:2012 fireplaces. Components. Concrete exterior wall elements. | 1.4.2012 | 1.4.2013 | 2 + | ||
UNE-EN 12467:2013 Flat fiber-reinforced cement plates. Product specifications and test methods. | 1.7.2013 | 1.7.2013 | 3/4 | ||
UNE-EN 12566-1:2000 Small wastewater purification facilities for populations of up to 50 equivalent inhabitants. Part 1: Prefabricated septic slabs. UNE-EN 12566-1/A1:2004 | 1.12.2004 | 1.12.2005 | |||
8.8.2014 | 8.8.2015 | ||||
UNE-EN 12566-4:2008 Small wastewater debugging facilities for populations up to 50 inhabitants equivalents. Part 4: Septic Fosas mounted on their destination from prefabricated sets. | 1.1.2009 | 1.1.2010 | |||
UNE-EN 12566-6:2013 Small wastewater debugging facilities for populations of up to 50 inhabitants equivalents. Part 6: Prefabricated purification units for septic tank effluents. | 1.11.2013 | 1.11.2014 | 1/3/4 | ||
UNE-EN 12566-7:2013 Small wastewater debugging facilities for populations up to 50 inhabitants equivalents. Part 7: Prefabricated tertiary treatment units. | 8.8.2014 | 8.8.2015 | 1/3/4 |
||
UNE-EN 12591:2009 Betunes and bituminous binders. Bitumen specifications for paving. | 1.1.2010 | 1.1.2011 | 2 + | ||
UNE-EN 12602:2011 + A1:2014 Prefabricated elements of armed cell concrete cured in autoclave. | 8.8.2014 | 8.8.2015 | 2 + /4 | ||
UNE-EN 12620:2003 + A1:2009 Arids for Concrete. | 1.1.2009 | 1.1.2010 | 2 + /4 (1) | ||
UNE-EN 12676-1:2001 Anti-glare screens for roads. Part 1: Benefits and features. UNE-EN 12676-1/A1:2003 | 1.2.2004 | 1.2.2006 | |||
UNE-EN 12737:2006 + A1:2008 Precast concrete products. Soil grids for livestock. UNE-EN 12737:2006 + A1:2008 ERRATUM: 2011 | 1.1.2009 | 1.1.2010 | 2 + | ||
1.1.2009 | 1.1.2010 | 4 | |||
UNE-EN 12794:2006 + A1:2008 Precast concrete products. Foundation piles. UNE-EN 12794:2006 + A1:2008/AC: 2009 | 1.2.2008 1.8.2009 | 1.2.2009 1.8.2009 | 2 + | ||
UNE-EN 12809:2002 Independent household boilers using solid fuel-rated thermal power less than or equal to 50 kW-Requirements and test methods. UNE-EN 12809:2002/A1:2005 UNE-EN 12809/AC: 2006 UNE-EN 12809:2002/A1:2005/AC: 2007 | 1.7.2005 1.7.2005 1.1.2008 1.1.2008 | 1.7.2007 1.7.2007 1.1.2008 1.1.2008 | 3 | ||
UNE-EN 12815:2002 Domestic Cooks Using solid fuels-Requirements and test methods. UNE-EN 12815:2002/A1:2005 UNE-EN 12815/AC: 2006 UNE-EN 12815:2002/A1:2005/AC: 2007 |
1.7.2005 1.7.2005 1.1.2007 1.1.2008 | 1.7.2007 1.7.2007 1.1.2007 1.1.2008 | 3 | ||
UNE-EN 12839:2012 Concrete precast products. Items for fencing. | 1.10.2012 | 1.10.2013 | 4 | ||
UNE-EN 12843:2005 Prefabricated concrete products. Masts and posts. | 1.9.2005 | 1.9.2007 | 2 + | ||
UNE-EN 12859:2012 gypsum panels. Definitions, specifications, and test methods. | 1.12.2011 | 1.12.2012 | 3/4 | ||
UNE-EN 12860:2001 plaster-based adhesives for gypsum panels. Definitions, specifications, and test methods. UNE-EN 12860 :2001/ERRATUM: 2002 UNE-EN 12860 :2001/AC: 2002 | 1.4.2002 1.1.2010 | 1.4.2003 1.1.2010 | 3/4 | ||
UNE-EN 12878:2007 + ERRATUM Pigments for the colouring of cement and/or lime-based construction materials. Test specifications and methods. UNE-EN 12878 :2007/AC: 2007 | 1.3.2006 1.1.2007 | 1.3.2007 1.1.2007 | 2 + | ||
UNE-EN 12899-1:2009 Fixed vertical signs of circulation. Part 1: Fixed signs. UNE-EN 12899-1:2009 ERRATUM: 2010 | 1.1.2009 | 1.1.2013 | 1 | ||
UNE-EN 12899-2:2010 Fixed vertical signs of circulation. Part 2: Internally Lit Bollards. | 1.1.2009 | 1.1.2013 | 1 | ||
UNE-EN 12899-3:2010 Fixed vertical signs of circulation. Part 3: Delineers and retroreflective devices. | 1.1.2009 | 1.1.2013 | 1 |
||
UNE-EN 12951:2006 Accessories for prefabricated covers. Permanent cover ladders. Product specifications and test methods. | 1.9.2005 | 1.9.2006 | 3 | ||
UNE-EN 12966-1:2006 + A1:2010 Vertical road signs. Variable message traffic signals. Part 1: Product rules. | 1.8.2010 | 1.8.2010 | 1 | ||
UNE-EN 13024-2:2005 Glass for Building. Heat-tempered borosilicate glass. Part 2: Compliance Assessment/Product Standard. | 1.9.2005 | 1.9.2006 | 1/3/4 |
||
UNE-EN 13043:2003 Arids for bituminous mixtures and surface treatments of roads, airports, and other paved areas. UNE-EN 13043 :2003/AC: 2004 | 1.7.2003 1.6.2006 | 1.6.2004 1.6.2006 | 2 + /4 (1) | ||
UNE-EN 13055-1:2003 Light Arides. Part 1: Light aggregates for concrete, mortar and injected. UNE-EN 13055-1/AC: 2004 | 1.3.2003 1.1.2010 | 1.6.2004 1.1.2010 | 2 + /4 (1) | ||
UNE-EN 13055-2:2005 Light aggregates. Part 2: Light aggregates for bituminous mixtures, surface treatments, and applications in treated and untreated layers. | 1.5.2005 | 1.5.2006 | 2 + /4 (1) | ||
UNE-EN 13063-1:2006 + A1:2008 Chimneys. Chimneys with clay or ceramic smoke ducts. Part 1: Requirements and methods of testing for soot resistance. | 1.5.2008 | 1.5.2009 | 2 + | ||
UNE-EN 13063-2:2006 + A1:2008 fireplaces. Chimneys with clay or ceramic smoke ducts. Part 2: Requirements and methods of testing in wet conditions. | 1.5.2008 | 1.5.2009 | 2 + | ||
UNE-EN 13063-3:2008 Chimneys. Fireplaces with inner tubes of clay or ceramics. Part 3: Requirements and test methods for fireplaces with air shooting system. | 1.5.2008 | 1.5.2009 | 2 + /4 | ||
1.5.2006 | 1.5.2007 | 2 + | |||
UNE-EN 13084-5:2006 Self-supporting industrial fireplaces. Part 5: Materials for brick ducts. Product specification. | 1.4.2006 | 1.4.2007 | 2 + | ||
UNE-EN 13084-7: 2013 Self-supporting fireplaces. Part 7: Product specifications for cylindrical construction of steel for use in single wall fireplaces of steel and steel coatings. | 1.9.2013 |
2 + | |||
UNE-EN 13101:2003 Pates for buried log wells. Requirements, marking, testing, and conformity assessment. | 1.8.2003 | 1.8.2004 | 4 |
||
UNE-EN 13108-1:2008 Bituminous Mixtures: Material Specifications. Part 1: Bituminous Concrete. | 1.3.2007 | 1.1.2009 | 1/2 + /3/4 | ||
UNE-EN 13108-2:2007 Bituminous mixtures. Material Specifications: Part 2: Bituminous mixtures for thin layers. UNE-EN 13108-2:2007/AC: 2008 | 1.3.2007 1.1.2009 | 1.3.2008 1.1.2009 | 1/2 + /3/4 | ||
UNE-EN 13108-3:2007 Bituminous Mixtures: Material Specifications. Part 3: Bituminous Mixtures type SA. UNE-EN 13108-3:2007/AC: 2008 | 1.3.2007 1.1.2009 | 1.3.2008 1.1.2009 | 1/2 + /3/4 | ||
UNE-EN 13108-4:2007 Bituminous mixtures. Specifications of materials. Part 4: HRA type bituminous mixtures. UNE-EN 13108-4:2007/AC: 2008 | 1.3.2007 1.1.2009 | 1.3.2008 1.1.2009 | 1/2 + /3/4 | ||
UNE-EN 13108-5:2007 Bituminous mixtures. Specifications of materials. Part 5: SMA-type bituminous mixtures. UNE-EN 13108-5:2007/AC: 2008 | 1.3.2007 1.1.2009 | 1.3.2008 1.1.2009 | 1/2 + /3/4 | ||
UNE-EN 13108-6:2007 Bituminous mixtures. Specifications of materials. Part 6: Bituminous Mastics. UNE-EN 13108-6:2007/AC: 2008 | 1.3.2007 1.1.2009 | 1.3.2008 1.1.2009 | 1/2 + /3/4 | ||
UNE-EN 13108-7:2007 Bituminous mixtures. Specifications of the material. Part 7: Draining bituminous mixtures. UNE-EN 13108-7:2007/AC: 2008 | 1.3.2007 1.1.2009 | 1.3.2008 1.1.2009 | 1/2 + /3/4 | ||
UNE-EN 13139:2003 Arids for mortars. UNE-EN 13139/AC: 2004 | 1.3.2003 1.1.2010 | 1.6.2004 1.1.2010 | 2 + /4 (1) | ||
UNE-EN 13160-1:2003 leak detection systems. Part 1: General principles. | 1.3.2004 | 1.3.2005 | 3/4 | ||
UNE-EN 13162:2013 + A1:2015 Thermal insulating products for applications in the building. Manufactured products of mineral wool (MW). Specification. | 10.7.2015 | 10.7.2016 | 1/3/4 | ||
UNE-EN 13163:2013 + A1:2015 Thermal insulating products for applications in the building. Expanded polystyrene (EPS) manufactured products. Specification. | 10.7.2015 | 10.7.2016 | 1/3/4 | ||
UNE-EN 13164:2013 + A1:2015 Thermal insulating products for applications in the building. Extruded polystyrene (XPS) manufactured products. Specification. | 10.7.2015 | 10.7.2016 | 1/3/4 | ||
UNE-EN 13165:2013 + A1:2015 Thermal insulating products for applications in the building. Manufactured products of rigid polyurethane foam (PUR). Specification. | 10.7.2015 | 10.7.2016 | 1/3/4 | ||
UNE-EN 13166: 2013 + A1:2015 Thermal insulating products for applications in the building. Phenolic foam (PF) manufactured products. Specification. | 10.7.2015 | 10.7.2016 | 1/3/4 | ||
UNE-EN 13167:2013 + A1:2015 Thermal insulating products for applications in the building. Manufactured products of cellular glass (CG). Specification. | 10.7.2015 | 10.7.2016 | 1/3/4 | ||
UNE-EN 13168:2013 + A1:2015 Thermal insulating products for applications in the building. Manufactured wood wool products (WW). Specification. | 10.7.2015 | 10.7.2016 | 1/3/4 | ||
UNE-EN 13169:2013 + A1:2015 Thermal insulating products for applications in the building. Expanded perlite manufactured products (EPB). Specification. | 10.7.2015 | 10.7.2016 | 1/3/4 | ||
UNE-EN 13170:2013 + A1:2015 Thermal insulating products for applications in the building. Expanded cork manufactured products (BCI). Specification. | 10.7.2015 | 10.7.2016 | 1/3/4 | ||
UNE-EN 13171:2013 + A1:2015 Thermal insulating products for applications in the building. Manufactured wood fibre products (WF). Specification. | 10.7.2015 | 10.7.2016 | 1/3/4 | ||
UNE-EN 13224:2012 Precast Concrete Products-Elements for Nervated Forges. | 1.8.2012 | 1.8.2013 | 2 + | ||
UNE-EN 13225:2013 Precast concrete products. Linear structural elements. | 8.8.2014 | 8.8.2015 | 2 + | ||
UNE-EN 13229:2002 Insertable appliances, including open homes, that use solid fuels-Requirements and test methods. UNE-EN 13229/A1:2003 UNE-EN 13229:2002/A2:2005 UNE-EN 13229 /AC:2006 UNE-EN 13229:2002/A2:2005/AC: 2007 | 1.7.2005 1.6.2006 1.7.2005 1.7.2007 1.1.2008 | 1.7.2007 1.6.2007 1.7.2007 1.7.2007
| 3 | ||
1.7.2005 1.7.2005 1.1.2007 1.1.2008 | 1.7.2007 1.7.2007 1.1.2007 1.1.2008 | 3 | |||
UNE-EN 13241-1:2004 + A1:2011 Industrial, commercial, and of garage and gates. Product Standard. Part 1: Products without characteristics of fire resistance or smoke control. | 1.1.2012 | 1.1.2013 | |||
1.1.2009 | 1.1.2010 | 2 + /4 (1) | |||
UNE-EN 13245-2:2009 Plastics. Non-plasticized poly (vinyl chloride) (PVC-U) profiles for building applications. Part 2: Profiles for interior and exterior wall and ceiling finishes. UNE-EN 13245-2:2009/AC: 2010 | 1.7.2010 1.7.2010 | 1.7.2012 1.7.2010 | 1/3/4 | ||
UNE-EN 13249:2001 Geotextiles and related products. Requirements for use in road construction and other traffic areas (excluding railway tracks and asphalt rolling layers). UNE-EN 13249:2001/A1:2005 | 1.10.2001 1.11.2005 | 1.10.2002 1.11.2006 | 2 + /4 | ||
1.10.2001 1.6.2006 | 1.10.2002 1.6.2007 | 2 + /4 | |||
UNE-EN 13251:2001 Geotextiles and related products. Requirements for use in land movements, foundations and containment structures. UNE-EN 13251:2001/A1:2005 | 1.10.2001 1.6.2006 | 1.10.2002 1.6.2007 | 2 + /4 | ||
UNE-EN 13252:2001 Geotextiles and related products. Requirements for use in drainage systems. UNE-EN 13252/ERRATUM: 2002 UNE-EN 13252:2001/A1:2005 | 1.10.2001 1.6.2006 | 1.10.2002 1.6.2007 | 2 + /4 | ||
UNE-EN 13253:2001 Geotextiles and Products related. Requirements for use in works for the control of erosion (coastal protection and coating of slopes). UNE-EN 13253:2001/A1:2005 | 1.10.2001 1.6.2006 | 1.10.2002 1.6.2007 | 2 + /4 | ||
UNE-EN 13254:2001 Geotextiles and related products . Requirements for use in the construction of reservoirs and dams. UNE-EN 13254/AC: 2003 UNE-EN 13254:2001/A1:2005 | 1.10.2001 1.6.2006 1.6.2006 | 1.10.2002 1.6.2006 1.6.2007 |
2 + /4 | ||
UNE-EN 13255:2001 Geotextiles and related products. Requirements for use in building channels. UNE-EN 13255/AC: 2003 UNE-EN 13255:2001/A1:2005 | 1.10.2001 1.6.2006 1.6.2006 | 1.10.2002 1.6.2006 1.6.2007 |
2 + /4 | ||
UNE-EN 13256:2001 Geotextiles and related products. Requirements for use in building tunnels and underground structures. UNE-EN 13256/AC: 2003 UNE-EN 13256:2001/A1:2005 | 1.10.2001 1.6.2006 1.6.2006 | 1.10.2002 1.6.2006 1.6.2007 | 2 + /4 | ||
UNE-EN 13257:2001 Geotextiles and related products. Requirements for use in solid waste dumps. UNE-EN 13257/AC: 2003 UNE-EN 13257:2001/A1:2005 | 1.10.2001 1.6.2006 1.6.2006 | 1.10.2002 1.6.2006 1.6.2007 |
2 + /4 | ||
UNE-EN 13263-1:2006 + A1:2009 Silica smoke for concrete. Definitions, requirements, and compliance control. | 1.1.2010 | 1.1.2011 | 1 + | ||
UNE-EN 13265:2001 Geotextiles and related products. Requirements for use in liquid waste container projects. UNE-EN 13265/AC: 2003 UNE-EN 13265:2001/A1:2005 | 1.10.2001 1.6.2006 1.6.2006 | 1.10.2002 1.6.2006 1.6.2007 | 2 + /4 | ||
UNE-EN 13279-1:2009 Construction and pre-construction Yeso for construction. Part 1: Definitions and specifications. | 1.10.2009 | 1.10.2010 | 3/4 | ||
UNE-EN 13282-1:2013 Hydraulics for roads. Part 1: Hydraulic conglomerants for fast hardening roads. Composition, specifications, and compliance criteria. | 1.11.2013 | 1.11.2014 | 2 + |
||
UNE-EN 13310:2003 Kitchen Fregeries. Functional requirements and test methods. | 1.2.2004 | 1.2.2006 | 4 | ||
UNE-EN 13341: 2005 + A1:2011 Fixed thermoplastic tanks for surface storage of domestic heating, kerosene, and diesel fuels. Extrusion-blow molded polyethylene tanks of polyethylene molded by rotational molding and polyamide6 manufactured by ionic polymerization. Testing requirements and methods. | 1.10.2011 | 1.10.2011 | 3 | ||
UNE-EN 13361:2005 Geosynthetic bars. Requirements for use in the construction of reservoirs and dams. UNE-EN 13361:2005/A1:2007 | 1.9.2005 1.6.2007 |
1.9.2006 1.6.2008 | 2 + | ||
UNE-EN 13362: 2006 Geosynthetic Barres. Requirements for using channel construction | 1.2.2006 | 1.2.2007 | 2 + |
||
UNE-EN 13383-1:2003 Schoolgirls. Part 1: Specifications. UNE-EN 13383-1/AC: 2004 | 1.3.2003 1.1.2010 | 1.6.2004 1.1.2010 | 2 + /4 (1) | ||
UNE-EN 13407:2007 murals. Functional requirements and test methods. | 1.1.2008 | 1.1.2009 | 4 | ||
UNE-EN 13450:2003 Arids for ballast. UNE-EN 13450/AC: 2004 | 1.10.2003 1.1.2007 | 1.6.2004 1.1.2007 | 2 + /4 (1) | ||
UNE-EN 13454-1:2006 Glomerantes, composite binders and mixtures made in the factory for autonivellant soils based on calcium sulphate. Part 1: Definitions and specifications. | 1.7.2005 | 1.7.2006 | 1/3/4 | ||
UNE-EN 13479:2005 Consumables for welding. General product standard for injection and flux metals for metal materials melting. | 1.10.2005 | 1.10.2006 |
2 + | ||
UNE-EN 13491:2005 Geosynthetic barriers. Requirements for their use as waterproofing membranes against fluids in the construction of tunnels and underground structures. UNE-EN 13491:2005/A1:2007 | 1.9.2005 1.6.2007 | 1.9.2006 1.6.2008 | 2 + | ||
UNE-EN 13492:2006 Geosynthetic Barres. Requirements for use in the construction of landfills, transfer stations or secondary confinement enclosures for liquid waste. UNE-EN 13492:2006/A1:2007 | 1.9.2005 1.6.2007 | 1.9.2006 1.6.2008 | 2 + | ||
UNE-EN 13493:2006 Geosynthetic Barres. Requirements for use in building storage works and landfills for solid waste. | 1.3.2006 | 1.3.2007 |
2 + | ||
UNE-EN 13502:2003 Chimneys. Terminals of the clay/ceramic smoke ducts. Testing requirements and methods. | 1.8.2003 | 1.8.2004 | 4 | ||
UNE-EN 13561:2004 + A1:2009 Toldos. Performance requirements including security. | 1.8.2009 | 1.8.2010 | 4 | ||
UNE-EN 13564-1:2003 Antiflood devices for buildings. Part 1: Requirements. | 1.5.2003 | 1.5.2004 | 4 | ||
UNE-EN 13616:2005 Overflow prevention devices for static tanks for liquid petroleum fuels. UNE-EN 13616 :2005/AC: 2006 | 1.5.2005 1.6.2006 | 1.5.2006 1.6.2006 | 3/4 | ||
UNE-EN 13658-1:2006 Enlist_body and metal cantons. Definitions, requirements and test methods. Part 1: Inlucid interior. | 1.3.2006 | 1.3.2007 | 3/4 | ||
UNE-EN 13658-2:2006 Metering and metal cuttings. Definitions, requirements and test methods. Part 2: Outer lucid. | 1.3.2006 | 1.3.2007 | 3/4 | ||
UNE-EN 13659:2004 + A1:2009 blinds. Performance requirements including security. | 1.8.2009 | 1.8.2010 | 4 | ||
UNE-EN 13693:2005 + A1:2010 Precast concrete products. Special items for covers. | 1.5.2010 | 1.5.2011 | 2 + | ||
UNE-EN 13707:2005 + A2:2010 Flexible Laminas for Waterproofing. Bituminous sheets with armor for waterproofing of covers. Definitions and features .. | 1.4.2010 | 1.10.2010 | 1/2 + /3/4 | ||
UNE-EN 13747:2006 + A2:2011 Precast concrete products. Preps for forged systems. | 1.1.2011 | 1.1.2011 | 2 + | ||
UNE-EN 13748-1:2005 Terrazzo Tiles. Part 1: Terrazzo Floor Tiles for indoor use. UNE-EN 13748-1:2005/ERRATUM: 2005 UNE 127 748-1:2012 (2) | 1.6.2005 |
1.10.2006 | 4 | ||
UNE-EN 13748-2:2005 Terrazzo Tiles. Part 2: Terrazzo hardwoods for outdoor use. UNE 127 748-2:2012 (2) | 1.4.2005 | 1.4.2006 | |||
UNE-EN 13808:2013 Betunes and bituminous binders. Specifications of the cationic bituminous emulsions. UNE-EN 13808:2013/1M: 2014 | 8.8.2014 | 8.8.2015 | 2 + | ||
UNE-EN 13813:2003 Autoniving Pastas and autoniving pastes for soils. Autonivellant pastes. Features and specifications. | 1.8.2003 | 1.8.2004 | 1/3/4 | ||
UNE-EN 13815:2007 fibrous gypsum materials. Definitions, specifications and test methods .. | 1.6.2007 | 1.6.2008 | 1/3/4 |
||
UNE-EN 13830:2004 Light Facades. Product Standard. | 1.12.2004 | 1.12.2005 | 1/3 | ||
UNE-EN 13859-1:2010 Flexible Laminas for Waterproofing. Definitions and characteristics of auxiliary sheets. Part 1: Auxiliary laminas for decks with discontinuous elements. | 1.4.2011 | 1.4.2012 | 1/3/4 | ||
UNE-EN 13859-2:2010 Flexible Laminas for Waterproofing. Definitions and characteristics of auxiliary sheets. Part 2: Auxiliary walls for walls. | 1.4.2011 | 1.4.2012 | 1/3/4 | ||
UNE-EN 13877-3:2005 Concrete Pavements. Part 3: Specifications for metal anchors used in concrete pavements. | 1.9.2005 | 1.9.2006 | |||
1.6.2008 | 1.6.2009 | 3/4 | |||
UNE-EN 13924:2006 Betunes and bituminous binders. Hard bitumen specifications for paving. UNE-EN 13924:2006/1M: 2010 | 1.1.2010 | 1.1.2011 |
2 + | ||
UNE-EN 13950:2014 Transformed plaster board laminated with thermal/acoustic insulation. Definitions, specifications and test methods. | 13.2.2015 | 13.2.2016 | 1/3/4 |
||
UNE-EN 13956:2013 Flexible Laminas for Waterproofing. Plastic and rubber sheets for waterproofing of covers. Definitions and features. | 1.10.2013 | 1.10.2013 | 1/2 + /3/4 | ||
UNE-EN 13963:2006 Together material for laminated gypsum boards. Definitions, specifications and test methods. UNE-EN 13963:2006 ERRATUM: 2009 | 1.3.2006 | 1.3.2007 |
3/4 | ||
UNE-EN 13964:2006 Suspended beds. Test requirements and methods. UNE-EN 13964:2006/A1:2008 | 1.1.2005 1.1.2008 | 1.7.2007 1.1.2009 | 1/3/4 | ||
UNE-EN 13967:2013 Flexible Laminas for waterproofing. Plastic and rubber anti-stacking laminas, including sheets plastic and rubber used for the sealing of buried structures. Definitions and features. | 1.3.2013 | 1.7.2013 | 1/2 + /3/4 | ||
UNE-EN 13969:2005 Flexible waterproofing Laminas. Bituminous anticapitarity sheets including bituminous sheets for the stanness of buried structures. Definitions and features. UNE-EN 13969:2005/A1:2007 | 1.9.2005 1.1.2008 | 1.9.2006 1.1.2009 | 1/2 + /3/4 | ||
UNE-EN 13970:2005 Flexible Laminas for Waterproofing. Bituminous sheets for the control of water vapour. Definitions and features. UNE-EN 13970:2005/A1:2007 | 1.9.2005 1.1.2008 | 1.9.2006 1.1.2009 | 1/3/4 | ||
UNE-EN 13978-1:2006 Concrete precast products. Prefabricated concrete garages. Part 1: Requirements for reinforced one-piece garages or made up of individual items with room dimensions. | 1.3.2006 |
2 + | 2 + | ||
UNE-EN 13984:2013 Flexible Laminas for Waterproofing. Plastic and rubber sheets for steam control. Definitions and features. | 1.11.2013 | 1.11.2013 | 1/3/4 | ||
UNE-EN 13986:2006 + A1:2015 Wood-derived tablets for use in construction. Features, conformity assessment and marking. | 13.11.2015 | 13.11.2016 | 1/2 + /3/4 | ||
UNE-EN 14016-1:2006 Glues for continuous magnesia soleras. Caustic magnesia and magnesium chloride. Part 1: Definitions and specifications. | 1.12.2004 | 1.12.2005 | 3/4 | ||
UNE-EN 14023:2010 Betunes and bituminous binders. Structure of specifications of modified bitumens with polymers. | 1.1.2011 | 1.1.2012 | 2 + | ||
UNE-EN 14037-1:2003 Radiating panels mounted on the water-fed roof at a temperature below 120 ° C. Part 1: Requirements and technical specifications. | 1.2.2004 | 1.2.2005 | 3 | ||
UNE-EN 14041:2005 Resilient floor coatings, textiles, and laminates. Essential Features. UNE-EN 14041:2005/AC: 2007 | 1.1.2006 1.1.2007 | 1.1.2007 1.1.2007 | 1/3/4 | ||
UNE-EN 14055:2011 1.9.2011 | 1.9.2011 | 1.9.2011 | 1.9.2012 | 4 | |
UNE-EN 14063-1:2006 Thermal insulating materials and materials. Expanded clay light aggregates applied in situ. Part 1: Specifying the products for insulating fillers prior to installation. UNE-EN 14063-1:2006/AC: 2008 | 1.6.2005 1.1.2008 | 1.6.2006 1.1.2008 | 1/3/4 | ||
Thermal insulating products for applications in the building. Thermal insulating products formed in situ from mineral wool (MW). Part 1: Specification for bulk products before installation. (Ratified by AENOR in June 2010). | 1.12.2010 | 1.12.2011 | 1/3/4 | ||
UNE-EN 14080:2013 Wood structures. Laminated laminated wood and solid wood. Requirements. | 8.8.2014 | 8.8.2015 | 1 |
||
UNE-EN 14081-1:2006 + A1:2011 Wood structures. Structural wood with rectangular cross-section, classified by its resistance. Part 1: General requirements. | 1.10.2011 | 31.12.2011 | 2 + | ||
UNE-EN 14178-2:2005 Glass for Building. Alkaline earth basic silicate glass products. Part 2: Compliance Assessment/Product Standard. | 1.9.2005 | 1.9.2006 | 1/3/4 |
||
UNE-EN 14179-2:2006 Glass for Building. Hot-tempered sodocalcium silicate safety glass. Part 2: Compliance Assessment/Product Standard. | 1.3.2006 | 1.3.2007 | 1/3/4 |
||
UNE-EN 14188-1:2005 Together sealing products. Part 1: Specifications for hot-applied sealing products. | 1.7.2005 | 1.1.2007 | |||
UNE-EN 14188-2:2005 Together sealing products. Part 2: Specifications for cold-applied sealing products. | 1.10.2005 | 1.1.2007 | 4 | ||
UNE-EN 14188-3:2007 Together sealing products. Part 3: Specifications for preformed joints. | 1.11.2006 | 1.11.2007 | 4 | ||
UNE-EN 14190:2014 Transformed rolled plaster board from secondary processes. Definitions, specifications and test methods. | 13.2.2015 | 13.2.2016 | 1/3/4 |
||
UNE-EN 14195:2005 Metal perfileria for partitions, walls, and ceilings on laminated plaster boards. Requirements definitions and test methods. UNE-EN 14195 :2005/AC: 2006 | 1.1.2006 1.1.2007 | 1.1.2007 1.1.2007 | 3/4 | ||
UNE-EN 14209:2006 Definitions, requirements, and test methods. | 1.9.2006 | 1.9.2007 | 3/4 | ||
UNE-EN 14216:2005 Cement. Composition, specifications, and compliance criteria for the special cements of very low hydration heat. | 1.2.2005 | 1.2.2006 |
1 + | ||
UNE-EN 14229:2011 Structural Wood. Wooden posts for overhead lines. | 1.9.2011 | 1.9.2012 | 2 + | ||
UNE-EN 14246:2007 Escayola Plates for suspended ceilings. Definitions, specifications, and test methods. UNE-EN 14246 :2007/AC: 2007 | 1.4.2007 1.1.2008 | 1.4.2008 1.1.2008 | 3/4 | ||
UNE-EN 14250:2010 Wood Structures. Product requirements for prefabricated certs assembled with clove connectors. | 1.11.2010 | 1.11.2010 | 2 + | ||
UNE-EN 14296:2006 Common wash Cubes for domestic uses. | 1.3.2006 | 1.3.2008 | |||
UNE-EN 14303:2010 + A1:2013 Thermal insulating products for building equipment and industrial installations-Products manufactured of mineral wool (MW). Specification. | 1.11.2013 | 1.11.2013 | 1/3/4 | ||
UNE-EN 14304:2010 + A1:2013 Thermal insulating products for building equipment and industrial facilities. Flexible elastomeric foam (FEF) manufactured products. Specification. | 1.11.2013 | 1.11.2013 | 1/3/4 | ||
UNE-EN 14305:2010 + A1:2013 Thermal insulating products for building equipment and industrial facilities-Cell glass manufactured products (CG). Specification. | 1.11.2013 | 1.11.2013 | 1/3/4 | ||
UNE-EN 14306:2010 + A1:2013 Thermal insulating products for building equipment and industrial facilities-Calcium silicate (CS) manufactured products. Specification. | 1.11.2013 | 1.11.2013 | 1/3/4 | ||
UNE-EN 14307:2010 + A1:2013 Thermal insulating products for building equipment and industrial facilities. Extruded polystriene (XPS) manufactured products. Specification. | 1.11.2013 | 1.11.2013 | 1/3/4 | ||
UNE-EN 14308:2011 + A1:2013 Thermal insulating products for building equipment and industrial installations. Manufactured products of rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR). Specification. | 1.11.2013 | 1.11.2013 | 1/3/4 | ||
UNE-EN 14309:2011 + A1:2013 Thermal insulating products for building equipment and industrial facilities. Expanded polystyrene (EPS) manufactured products. Specifications. | 1.11.2013 | 1.11.2013 | 1/3/4 | ||
UNE-EN 14313:2011 + A1:2013 Thermal insulating products for building equipment and industrial facilities. Manufactured products of polyethylene foam (PEF). Specifications. | 1.11.2013 | 1.11.2013 | 1/3/4 | ||
EN 14314:2009 + A1:2013 Thermal insulating products for building equipment and industrial facilities. Phenolioca foam (PF) manufactured products. Specifications (Ratified by AENOR in March 2013). | 1.11.2013 | 1.11.2013 | 1/3/4 | ||
UNE-EN 14315 -1:2013 Thermal insulating products for building applications. Rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products projected in situ. Part 1: Specifications for rigid foam projection systems prior to installation. | 1.11.2013 | 1.11.2014 | 1/3/4 | ||
UNE-EN 14316-1:2005 Thermal insulating products for applications in the building. Thermal insulating products formed in-situ from expanded perlite (PE). Part 1: Specification for the bulk and agglomerated products before installation. | 1.6.2005 | 1.6.2006 | |||
UNE-EN 14317-1:2005 Thermal insulating products for applications in the building. Thermal insulating products formed in situ from exfoliated vermiculite (EV). Part 1: Specification for the bulk and agglomerated products before installation. | 1.6.2005 | 1.6.2006 | |||
UNE-EN 14318-1:2013 Thermal insulating products for applications in the building. Rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products for in-situ casting. Part 1: Specifications for rigid foam casting systems prior to installation. | 1.11.2013 | 1.11.2014 | 1/3/4 | ||
UNE-EN 14319-1:2013 Thermal insulating products for building equipment and industrial installations. Rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products for in-situ casting. Part 1: Specifications for rigid foam casting systems prior to installation. | 1.11.2013 | 1.11.2014 | 1/3/4 | ||
UNE-EN 14320-1:2013 Thermal insulating products for building equipment and industrial installations. Rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products projected in-situ. Part 1: Specifications for rigid foam projection systems prior to installation. | 1.11.2013 | 1.11.2014 | 1/3/4 | ||
UNE-EN 14321-2:2006 Glass for Building. Hot-hardened alkaline-earth silicate safety glass. Part 2: Assessment of compliance. | 1.6.2006 | 1.6.2007 | 1/3/4 | ||
UNE-EN 14339:2006 Fire hydrants underground. | 1.5.2006 | 1.5.2007 | 1 | ||
UNE-EN 14342:2013 Wood and park floors. Features, conformity assessment and marking. | 8.8.2014 | 8.8.2015 | 1/3/4 |
||
UNE-EN 14351-1:2006 + A1:2011 Windows and external pedestrian doors. Product standard, capability features. Part 1: Windows and exterior pedestrian gates with no characteristics of fire resistance and/or smoke leak control. | 1.12.2010 | 1.12.2010 | 1/3/4 | ||
UNE-EN 14353:2009 + A1:2012 Guardavivos and metal profiles for laminated gypsum boards. Definitions, specifications, and test methods. | 1.11.2010 | 1.11.2010 | 3/4 | ||
UNE-EN 14374:2005 Wood structures. Microreduced wood (LVL). Requirements. | 1.9.2005 | 1.9.2006 | 1 | ||
UNE-EN 14384:2006 Column Hidrants. | 1.5.2006 | 1.5.2007 | 1 | ||
UNE-EN 14388:2006 Traffic Noise Reduction Devices. Specifications. UNE-EN 14388 :2006/AC: 2008 | 1.5.2006 1.1.2009 | 1.5.2007 1.1.2009 | 3 | ||
UNE-EN 14396:2004 Fixed Stages for Log Wells. |
1.12.2004 | 1.12.2005 | 4 | ||
UNE-EN 14399-1:2009
| 1.1.2006 | 1.10.2007 | 2 + | ||
UNE-EN 14411:2013 Ceramic Tiles. Definitions, classification, features, and marking. | 1.7.2013 | 1.7.2014 | 3/4 |
||
UNE-EN 14428:2005 + A1:2008 Shower Mamparas. Functional requirements and test methods. | 1.1.2009 | 1.1.2010 | 4 | ||
UNE-EN 14449:2006 Glass for Building. Laminated glass and laminated safety glass. Conformity assessment. UNE-EN 14449 :2006/AC: 2006 | 1.3.2006 1.6.2006 | 1.3.2007 1.6.2006 | 1/3/4 | ||
UNE-EN 14471:2013 + A1:2015 Chimneys. Requirements and methods of testing for chimneys systems with plastic smoke ducts. | 10.7.2015 | 10.7.2016 | 1/2 + /3/4 | ||
1.9.2006 | 1.9.2007 | 3/4 | |||
UNE-EN 14509:2014 Double-sided, self-supporting sandwich panels. Factory-made products. Specifications. | 8.8.2014 | 8.8.2015 | 1/3/4 | ||
UNE-EN 14516:2006 + A1:2010 Home-use Baneras. | 1.5.2011 | 1.5.2012 | 4 | ||
UNE-EN 14527:2006 + A1:2010 Shower Plates for Domestic Uses. | 1.5.2011 | 1.5.2012 | 4 | ||
UNE-EN 14528:2007 Bidets. Functional requirements and test methods. | 1.1.2008 | 1.1.2009 | 4 | ||
UNE-EN 14545:2009 Wood structures. Connectors. Requirements. | 1.8.2009 | 1.8.2010 | 2 + /3 | ||
UNE-EN 14566 + A1:2009 Mechanical fixation elements for laminated plasterboard systems. Definitions, specifications, and test methods. | 1.5.2010 | 1.11.2010 | |||
UNE-EN 14592:2009 + A1:2012 Wood structures. Pin-type attachment elements. Requirements. | 1.3.2013 | 1.7.2013 | 3 | ||
UNE-EN 14604:2006 Autonomous smoke alarms. UNE-EN 14604 :2006/AC: 2009 | 1.5.2006 1.8.2009 | 1.8.2008 1.8.2009 | 1 | ||
UNE-EN 14647:2006 Calcium aluminate cement. Composition, specifications, and compliance criteria. | 1.8.2006 | 1.8.2007 | 1 + |
||
UNE-EN 14680:2007 Adhesives for pipeline systems in non-pressure thermoplastic materials. Specifications. | 1.1.2008 | 1.1.2009 | |||
UNE-EN 14688:2007 Healthcare appliances. Washbasins. Functional requirements and test methods. | 1.1.2008 | 1.1.2009 | 4 | ||
UNE-EN 14695:2010 Flexible waterproofing Laminas. Waterproofing of bridge boards in concrete and other concrete areas for vehicle traffic. Definitions and features. | 1.10.2010 | 1.10.2011 | 2 + | ||
UNE-EN 14716:2006 Tested beds. Specifications and test methods. | 1.10.2005 | 1.10.2006 | 1/3/4 | ||
UNE-EN 14782:2006 Self-supporting metal laminas for covers and wall cladding. | 1.11.2006 | 1.11.2007 | 3/4 | ||
UNE-EN 14783:2015 Fully supported metal blades and flaxes for indoor and outdoor covers and coatings. Product specification and requirements | 8.8.2014 | 8.8.2015 | 1/3/4 | ||
UNE-EN 14785:2007 Domestic heating appliances powered by wood pellets. Testing requirements and methods. | 1.1.2010 | 1.1.2011 | 3 | ||
UNE-EN 14800:2008 Flexible metal security corrugated pipe for connection of domestic appliances using gaseous fuels. | 1.1.2008 | 1.1.2009 | 1/3 | ||
1.1.2008 | 1.1.2009 | 4 | |||
UNE-EN 14843:2008 Prefabricated concrete products. Ladders. | 1.1.2008 | 1.1.2009 | 2 + | ||
UNE-EN 14844:2007 + A2:2012 Precast Concrete Products. Mark. | 1.9.2012 | 1.9.2013 | 2 + /4 | ||
UNE-EN 14846:2010 Building hardware. Locks and latches. Electromechanical locks and lockers. Testing requirements and methods. | 1.9.2011 | 1.9.2012 | 1 | ||
UNE-EN 14889-1:2008 Fibers for Concrete. Part 1: Steel fibres. Definitions, specifications, and compliance. | 1.6.2007 | 1.6.2008 | 1/3 | ||
UNE-EN 14889-2:2008 Fibers for Concrete. Polymeric fibers. Definitions, specifications, and compliance. | 1.6.2007 | 1.6.2008 | 1/3 | ||
UNE-EN 14891:2012 Waterproofing liquid membranes for use under ceramic tiles. Requirements, test methods, conformity assessment, classification and designation. UNE-EN 14891 :2012/AC: 2013 | 1.3.2013 1.3.2013 | 1.3.2013 1.3.2013 | 3 | ||
UNE-EN 14904:2007 Surfaces for Sports Areas. Specifications for indoor multi-sport flooring. | 1.2.2007 | 1.2.2008 | 1/3 |
||
UNE-EN 14909:2013 Flexible Laminas for Waterproofing. Plastic and plastic anti-stacking barriers. Definitions and features. | 1.3.2013 | 1.7.2013 | 1/3/4 | ||
UNE-EN 14915:2013 Friezes and Wood Blocks. Features, conformity assessment and marking. | 8.8.2014 | 8.8.2015 | 1/3/4 |
||
UNE-EN 14933:2008 Thermal insulating and light-fill products for applications in civil engineering. Expanded polystyrene (EPS) manufactured products. Specification. | 1.7.2008 | 1.7.2009 | 1/3 | ||
UNE-EN 14934:2008 Thin-filled and thermal insulating products for applications in civil engineering. Extruded polystyrene (XPS) manufactured products. Specification. | 1.7.2008 | 1.7.2009 | 1/3 | ||
UNE-IN 14963:2007 Covered for rooftops. Continuous plastic lusirants with or without socket. Classification requirements and test methods. | 1.8.2009 | 1.8.2012 | 1/3/4 | ||
UNE-EN 14964:2007 Lower rigid plates for roofs and discontinuous placement covers. Definitions and features. | 1.1.2008 | 1.1.2009 | 1/3/4 | ||
UNE-EN 14967:2007 Flexible Laminas for Waterproofing. Bituminous anti-capitalist barriers. Definitions and features. | 1.3.2007 | 1.3.2008 | 1/3/4 | ||
UNE-EN 14989-1:2008 Chimneys. Requirements and methods of testing for metal fireplaces and air supply conduits independent of the material for watertight boilers. Part 1: Vertical terminals for C6 type boilers. | 1.1.2008 | 1.1.2009 | 2 + | ||
UNE-EN 14989-2:2011 Chimneys. Requirements and methods of testing for metal fireplaces and air supply conduits independent of the material for watertight boilers. Part 2: Hum and air supply pipelines for watertight boilers. | 1.1.2009 | 1.1.2010 | 2 + | ||
1.1.2008 | 1.1.2009 | 2 + | |||
UNE-EN 14992:2008 + A1:2012 Prefabricated concrete products. Elements for walls. | 1.4.2013 | 1.7.2013 | 2 + /4 | ||
UNE-EN 15037-1:2010 Prefabricated concrete products. Voguette and bovedilla forging systems. Part 1: Viguets. | 1.1.2010 | 1.1.2011 | 2 + | ||
UNE-EN 15037-2:2009 + A1:2011 Precast concrete products. Voguette and bovedilla forging systems. Part 2: Concrete Bovels. UNE-EN 15037-2:2009 + A1:2011 ERRATUM: 2011 | 1.12.2011 | 1.12.2012 |
2 + | ||
UNE-EN 15037-3:2010 + A1:2011 Precast concrete products. Voguette and bovedilla forging systems. Part 3: Bovels of cooked clay. | 1.12.2011 | 1.12.2012 | 2 + | ||
UNE-EN 15037-4:2010 + A1:2014 Precast concrete products. Voguette and bovedilla forging systems. Part 4. Expanded polystyrene Bovilla. | 8.8.2014 | 8.8.2015 | 1/2 + /3/4 | ||
UNE-EN 15037-5:2013 Precast concrete products. Voguette and bovedilla forging systems. Part 5: Light Bovels for simple formwork. | 8.8.2014 | 8.8.2015 | 1/2 + /3/4 |
||
UNE-EN 15048-1:2008 Unpreloaded structural bolted unions. Part 1: General requirements. | 1.1.2008 | 1.10.2009 | 2 + | ||
UNE-EN 15050:2008 + A1:2012 Precast concrete products. Elements for bridges. | 1.12.2012 | 1.12.2012 | 2 + | ||
UNE-EN 15069:2009 Security valve for metal flexible tubes intended for attachment of household appliances using gaseous fuels. | 1.1.2009 | 1.1.2010 | 1/3/4 | ||
UNE-EN 15088:2006 Aluminium and aluminum alloys. Structural products for construction. Technical inspection and supply conditions. | 1.10.2006 | 1.10.2007 | 2 + | ||
UNE-EN 15102:2008 + a1:2012 v2 Decorative wall coverings. Coatings in the form of rolls and panels. | 1.7.2012 | 1.7.2012 | 1/3/4 | ||
UNE-EN 15129:2011 Anti-seismic devices. | 1.8.2010 | 1.8.2011 |
1/3 | ||
UNE-EN 15167-1:2008 High-oven ground granulated Escorias for use in concretes, mortars and pastes. Part 1: Definitions, specifications, and compliance criteria. | 1.1.2008 | 1.1.2009 | 1 + | ||
UNE-EN 15250:2008 Hot-release hot-release appliances powered by solid fuels. Testing requirements and methods. | 1.1.2008 | 1.1.2010 | 3 | ||
UNE-EN 15258:2009 Prefabricated concrete products. Retaining wall elements. | 1.1.2010 | 1.1.2011 | 2 + | ||
UNE-15274:2015 General Use Adhesives for Structural Unions. Testing requirements and methods. | 13.11.2015 | 13.11.2016 | 2 + | ||
UNE-15275:2015 Structural Adhesives. Characterization of anaerobic adhesives for coaxial metal joints in building and civil engineering structures. | 13.11.2015 | 13.11.2016 | 2 + | ||
UNE-EN 15283-1 + A1:2009 Laminated Plaster Plates reinforced with fibres. Definitions, requirements and test methods. Part 1: Fiber-woven laminated plaster plates. | 1.6.2010 | 1.6.2011 | 3/4 | ||
UNE-EN 15283-2 + A1:2009 Fiber-reinforced rolled plaster plates. Definitions, requirements and test methods. Part 2: Fiber-rolled plaster plates. | 1.6.2010 | 1.6.2011 | 3/4 | ||
UNE-EN 15285:2009 Agglomerated Stone. Modular floor tiles (internal and external use). | 1.1.2009 | 1.1.2010 | 1/3/4 |
||
UNE-EN 15286:2013 Agglomerated Stone. Slabs and tiles for wall (interior and exterior) finishes. | 8.8.2014 | 8.8.2015 | 1/3/4 | ||
UNE-EN 15322:2014 Betunes and bituminous binders. Framework for specification of fluidized and fluxated bituminous binders. | 8.8.2014 | 8.8.2015 | 2 + | ||
UNE-EN 15368:2010 + A1:2011 Hydraulic conglomerate for non-structural applications. Definition, specifications, and compliance criteria. | 1.9.2011 | 1.9.2012 | 2 + |
||
UNE-EN 15381:2008 Geotextiles and related products. Features required for use on pavements and asphalt covers. | 1.1.2010 | 1.1.2011 | 2 + | ||
8.8.2014 | 8.8.2015 | 2 + | |||
UNE-EN 15435:2009 Precast concrete products. Concrete formwork blocks of dense and light aggregates. Product and performance properties. | 1.2.2009 | 1.2.2010 | 4 | ||
UNE-EN 15497:2014 Structural solid wood with jagged joints. Minimum manufacturing requirements and requirements. | 10.10.2014 | 10.10.2015 | 1 | ||
UNE-EN 15498:2009 Precast concrete products. Concrete formwork blocks with wood chips. Product and performance properties. | 1.2.2009 | 1.2.2010 | 4 | ||
UNE-EN 15501:2014 Thermal insulating products for building equipment and industrial installations. Manufactured products of expanded perlite (EP) and exfoliated vermiculite (EV). Specification. | 8.8.2014 | 8.8.2015 | 3/4 | ||
Thermal insulating products for building and industrial installations equipment. In-situ thermal insulation formed from expanded perlite product (EP). Part 1: Specification of the agglomerated and bulk products prior to installation (ratified by AENOR in June 2011). | 1.4.2011 | 1.4.2012 | 3/4 | ||
15600-1:2010 Thermal insulating products for equipment of industrial buildings and installations. In-situ thermal insulation formed from exfoliated vermiculite (EV) products. Part 1: Specification of the agglomerated and bulk products prior to installation (ratified by AENOR in June 2011). | 1.4.2011 | 1.4.2012 | 3/4 | ||
UNE-EN 15650:2010 Building Ventilation. Firewall gates. | 1.9.2011 | 1.9.2012 | 1 | ||
UNE-EN 15651-1:2012 Sellants for non-structural use in building and pedestrian zone joints. Part 1: Sellants for facade elements. | 1.7.2013 | 1.7.2014 | 1/3/4 | ||
UNE-EN 15651-2:2012 Sellants for non-structural use in joints in buildings and pedestrian zones. Part 2: Sellings for glazing. | 1.7.2013 | 1.7.2014 | 1/3/4 | ||
UNE-EN 15651-3:2012 Sellants for non-structural use in building and pedestrian zone joints. Part 3: Sellants for health boards. | 1.7.2013 | 1.7.2014 | 1/3/4 | ||
UNE-EN 15651-4:2012 Sellants for non-structural use in joints in buildings and pedestrian zones. Part 4: Sellants for pedestrian zones. | 1.7.2013 | 1.7.2014 | 1/3/4 | ||
UNE-EN 15682-2:2014 Glass on Building. Heat-tempered alkaline-earth silicate safety glass and treated "heat soak". Part 2: Evaluating the compliance/product standard. | 8.8.2014 | 8.8.2015 | 1/3/4 |
||
UNE-EN 15683-2:2014 Glass on building. Heat-safe sodocalcium silicate glass in U. Part 2: conformity assessment/product standard. | 8.8.2014 | 8.8.2015 | 1/3/4 | ||
UNE-EN 15732:2014 Fill and product light materials thermal insulators for applications in civil engineering. Products based on light arid clay aggregates. | 1.8.2013 | 1.8.2014 | 1/3/4 |
||
UNE-EN 15743:2010 + A1:2015 Supersulfated Cement. Composition, specifications, and compliance criteria. | 13.11.2015 | 13.11.2016 | 1 + |
||
UNE-EN 15814:2011 + A2:2015 Thick bitumen coatings modified with waterproofing polymers. Definitions and requirements. | 10.7.2015 | 10.7.2016 | 1/3/4 | ||
UNE-EN 15821:2011 Single-combustion sauna stoves powered by natural wood logs. Testing requirements and methods. | 1.7.2011 | 1.7.2012 | 3 | ||
UNE-EN 15824:2010 Specifications for external revocals and internal lucid based on organic binders. | 1.4.2010 |
1.4.2011 | 1/3/4 |
||
UNE-EN 16034:2015 Pedestrian, industrial, commercial, garage, and practicable windows. Product standard, capability features. Characteristics of fire resistance and/or smoke control. | 1.9.2016 | 1.9.2019 | 1 |
||
UNE-EN 16069:2013 + A1:2015 Thermal insulating products for building applications. Manufactured products of polyethylene foam (PEF). Specification. | 10.7.2015 | 10.7.2016 | 1/3/4 | ||
UNE-EN 16153:2013 + A1:2015 Flat translucent plates of multiple layers of polycarbonate (PC) for indoor and outdoor decks, walls, and ceilings. Testing requirements and methods. | 10.7.2015 | 10.7.2016 | 1/3/4 | ||
UNE-EN 50575:2015 Power, Control, and Communication Cables. Cables for general applications under construction subject to fire reaction requirements. | 1.7.2016 | 1.7.2017 | 1 + /3/4 |
(1) The assessment system generally applicable to these products for regulatory purposes shall be 2 +; however, the specific regulatory provisions of each product may be laid down for certain products and uses; evaluation system 4.
(2) National complement of the European standard.
(*) When replacing a harmonised standard with a new version, for the purposes of CE marking, both versions can be used until the new version's coexistence period ends.
(**) Assessment and Verification Systems of the Constancy of the Prstations (EVCP):
System 1: Certification of product by a notified certification body (includes: determination of the product type, sampling, initial inspection, and complementary inspections of factory production control and certification of the product).
System 1 +: System 1 including sample survey trials taken prior to product introduction to the market.
System 2 +: Certification of factory production control by a notified factory production control certification body (includes initial inspection and periodic inspections of production control in factory).
System 3: Determination of the type product by a notified test laboratory.
System 4: Manufacturer declaration without intervention from notified bodies.
On 2 + and 4 systems, the manufacturer must perform the determination of the type product under his/her responsibility.
On systems 3 and 4 the manufacturer must also have an in-factory production control system in place.
ANNEX III
Notified bodies for certification in accordance with the technical specifications harmonised with European Regulation (EU) No 305/2011
The bodies authorised for the assessment of conformity referred to in Articles 3 and 4 of the Order of 29 November 2001, for which references are published to the UNE standards which are transposed into national law. harmonised standards, as well as the period of coexistence and the entry into force of the CE marking concerning several families of construction products, and the tasks to be performed are as follows.
Note:
This Annex III lists only notifications concerning the new harmonised standards set out in Annex II, or new notifications requested on harmonised standards included in the above. ministerial orders or published resolutions. To know the status of all the notifications made so far you can consult the electronic headquarters of the Ministry of Industry, Energy and Tourism:
http://www.f2i2.net/legislacionseguridadindustrial/SeguridadIndustrial.aspx
Those bodies already notified in the standards groups of systems 1 +, 1 and 2 +, as indicated in Tables 1 and 2 of this Annex III, will also be considered to be notified to all the effects for the new standards references. appear in the respective groups of those tables 1 and 2.
Body relationship:
CEIS/Test, Innovation and Services Center.
Notified Body Number: 1722.
Crtra. Villaviciosa de Odon a Mostoles, km 1.5, 28935 Mostoles (Madrid).
Tel.: 91,616.97.10-Fax: 91,616.23.72.
e-mail: ceis@ceis.es
Product | EVCP | |
---|---|---|
UNE-EN 50575:2015 | Power, Control, and Communication Cables. Cables for general applications in buildings subject to fire reaction requirements. | 3 |
ENSATEC, S.L.U.
Notified Body Number: 1668.
Av. Lentiscares, 4-8-Pol. Industrial Lentiscares-26370 Navarrete (La Rioja).
Tel.: 94 125 04 66-Fax: 94 125 33 88.
e-mail: luisgarcia@ensatec.com-vnavarro@ensatec.com
Horizontal "reporting" of test standards, valid for all products covered by harmonised standards in the Annex or Annexes Z to which the determination of one of the essential characteristics related to the test is included The following fire:
-Fire reaction on decks (standards): TS 1187.
-Fire reaction: EN 13823, EN ISO 11925-2, EN ISO 1182, EN ISO 1716, EN ISO 9239-1.
-Fire resistance: EN 1364-1, EN 1634-1.
Tecnalia Research & Innovation Foundation.
Notified Body Number: 1292.
C/ Geldo. Building 700-48160 DERIO (Vizcaya).
Tel.: 902.760.020-946.40.850-Fax: 901.760.004.
e-mail: javier.nunez@technalia.com; virginia.aseguinolaza@tecnalia.com
Product | EVCP | |
---|---|---|
UNE-EN 14509:2014 | Dual-faced, self-supporting sandwich sandwich panels. Factory-made products. | 3 |
UNE-EN 15682-2:2014 | Glass in the Building. Heat-tempered alkaline-earth silicate safety glass and treated "heat soak". Part 2: Evaluating the compliance/product standard. | 3 |
UNE-EN 15683-2:2014 | Glass in the building. Heat-safe sodocalcium silicate glass in U. Part 2: conformity assessment/product standard. | 3 |
TABLE 1
Grouping products and rules (for notification purposes)
Products by rating systems 1 + Y 1
(These groupings correspond to the ones set out in the "Industrial Products Regulations Control Organisms" document. Accreditation by Product Groups. NT 42 ", from ENAC).
Name | Rules | ||
---|---|---|---|
1 | Columns and lighting bacles. | UNE-EN 40-4:2006; UNE-EN 40-4:2005/AC: 2009; UNE-EN 40-5:2003; UNE-EN 40-6:2003; UNE-EN 40-7:2003. | |
2 | Detection, alarm, protection, fight, and fire control systems. Smoke and heat control systems. | EN 54-2:1997, adopted as UNE 23007-2:1998, EN 54-2:1997/A1:2006, adopted as UNE 23007-2:1998/1m: 2008; EN 54-2:1997/AC: 1999, adopted as UNE 23007-2:1998/ERRATUM: 2004; UNE-EN 54-3:2001; UNE-EN 54-3/A1:2002; UNE-EN 54-3:2001/A2:2007; EN 54-4:1997, adopted as UNE 23007-4:1998; EN 54-4:1997/AC: 1999, adopted as UNE 23007-4/ERRUM: 1999; EN 54-4:1997/A1:2002, adopted as UNE 23007-4/1M: 2003; EN 54-4:1997/A2:2006, adopted as UNE 23007-4:1998/2m: 2007; UNE-EN 54-5:2001; UNE-EN 54-5/A1:2002; UNE-EN 54-7:2001; UNE-EN 54-7/A1:2002; UNE-EN 54-7:2001/A2:2007; UNE-EN 54-10: 2002; UNE-EN 54-10: 2002/A1: 2007; UNE-EN 54-11: 2001; UNE-EN 54-11:2001/A1:2007; UNE-EN 54-12:2003; UNE-EN 54-16:2010; UNE-EN 54-17:2007; UNE-EN 54-18:2007; UNE-EN 54-20:2007; UNE-EN 54-20:2007/AC: 2009; UNE-EN 54-21:2007; UNE-EN 54-23:2011; UNE-EN 54-24:2010; UNE-EN 54-25:2009; UNE-EN 54-25:2009/AC: 2012; UNE-EN 671-1:2013; UNE-EN 671-2:2013; UNE-EN 12094-1:2004; UNE-EN 12094-2:2004; UNE-EN 12094-3:2003; UNE-EN 12094-4:2005; UNE-EN 12094-5:2007; UNE-EN 12094-6:2007; UNE-EN 12094-7:2001; UNE-EN 12094-7:2001/A1:2005; UNE-EN 12094-8:2007; UNE-EN 12094-9:2003; UNE-EN 12094-10:2004; UNE-EN 12094-11:2003; UNE-EN 12094-12:2004; UNE-EN 12094-13:2001; UNE-EN 12094-13:2001/AC: 2002; UNE-EN 12101-1: 2007; UNE-EN 12101-1: 2007/A1:2007; UNE-EN 12101-2:2004; UNE-EN 12101-3:2002; UNE-EN 12101-3:2002/AC: 2006; UNE-EN 12101-6:2006; UNE-EN 12101-7:2013; UNE-EN 12101-8:2015; UNE-EN 12101-10:2007; UNE-EN 12259-1:2002; UNE-EN 12259-1:2002/A2:2005; UNE-EN 12259-1:2002/A3: 2007; UNE-EN 12259-2:2000; UNE-EN 12259-2/A1:2001; UNE-EN 12259-2:2000/A2: 2007; UNE-EN 12259-2/AC: 2002; UNE-EN 12259-3:2001; UNE-EN 12259-3/A1:2001; UNE-EN 12259-3:2001/A2:2007; UNE-EN 12259-4:2000; UNE-EN 12259-4/A1:2001; UNE-EN 12259-5:2003; UNE-EN 14339:2006; UNE-EN 14384:2006; UNE-EN 14604:2006; UNE-EN 14604 :2006/AC: 2009; UNE-EN 15650:2010; UNE-EN 16034:2015; UNE-EN 50575:2015. | |
3 | Building hardware/Windows/doors and Facades light. | UNE-EN 179:2009; UNE-EN 1125:2009; UNE-EN 1154:2003; UNE-EN 1154 :2003/AC: 2006; UNE-EN 1155:2003; UNE-EN 1155 :2003/AC: 2006; UNE-EN 1158:2003; UNE-EN 1158 :2003/AC: 2006; UNE-EN 1935:2002; UNE-EN 1935 :2002/AC: 2004; UNE-EN 12209:2004; UNE-EN 12209 :2004/AC: 2008; UNE-EN 13830:2004; UNE-EN 14351-1:2006 + A1:2011; UNE-EN 14846:2010; UNE-EN 16034:2015. | |
4 | Cement/Additions to Concrete/Repair Systems structures. | UNE-EN 197-1:2011; UNE-EN 413-1:2011; UNE-EN 450-1:2013; UNE-EN 1504-2:2005; UNE-EN 1504-3:2006; UNE-EN 1504-4:2005; UNE-EN 1504-6:2007; UNE-EN 13263-1:2006 + A1:2009; UNE-EN 14216:2005; UNE-EN 14647:2006; UNE-EN 14889-1:2008; UNE-EN 14889-2:2008; UNE-EN 15167-1:2008; UNE-EN 15743:2010 + A1:2015; UNE-EN 15824:2010. | |
5 | Vehicle containment systems. | UNE-EN 1317-5:2008 + A2:2012. | |
6 | Road signage and traffic control equipment. | UNE-EN 1423:2013; UNE-EN 1423 :2013/AC: 2013; UNE-EN 1463-1:2010; UNE-EN 12352:2007; UNE-EN 12368:2008; UNE-EN 12899-1:2009; UNE-EN 12899-1:2009 ERRATUM: 2010; UNE-EN 12899-2:2010; UNE-EN 12899-3:2010; UNE-EN 12966-1:2006 + A1:2010. | |
7 | Structures of wood, wood boards and floors. | UNE-EN 13986:2006 + A1:2015; UNE-EN 14080:2013; UNE-EN 14342:2013; UNE-EN 14374:2005; UNE-EN 14915:2013; UNE-EN 15497:2014. | |
8 | Mixtures bituminous. | UNE-EN 13108-1:2008; UNE-EN 13108-2:2007; UNE-EN 13108-2:2007/AC: 2008; UNE-EN 13108-3:2007; UNE-EN 13108-3:2007/AC: 2008; UNE-EN 13108-4:2007; UNE-EN 13108-4:2007/AC: 2008; UNE-EN 13108-5:2007; UNE-EN 13108-5:2007/AC: 2008; UNE-EN 13108-6:2007; UNE-EN 13108-6:2007/AC: 2008; UNE-EN 13108-7:2007; UNE-EN 13108-7:2007/AC: 2008. | |
9 | Laminas for Waterproofing/Bituminous Plates. | UNE-EN 534:2007 + A1:2010; UNE-EN 13707:2005 + A2:2010; UNE-EN 13859-1:2010; UNE-EN 13859-2:2010; UNE-EN 13956:2013; UNE-EN 13967:2013; UNE-EN 13969:2005; UNE-EN 13969:2005/A1:2007; UNE-EN 13970:2005; UNE-EN 13970:2005/A1:2007; UNE-EN 13984:2013; UNE-EN 14909:2013; UNE-EN 14967:2007; UNE-EN 15651-1:2012; UNE-EN 15651-2:2012; UNE-EN 15651-3:2012; UNE-EN 15651-4:2012; UNE-EN 15814:2013 + A2:2015. | |
10 | Chimneys. | UNE-EN 14471:2013 + A1:2015. | |
11 | Glass. | UNE-EN 572-9:2006; UNE-EN 1036-2:2009; UNE-EN 1051-2:2008; UNE-EN 1096-4:2005; UNE-EN 1279-5:2006 + A2:2010; UNE-EN 1748-1-2:2005; UNE-EN 1748-2-2:2005; UNE-EN 1863-2:2005; UNE-EN 12150-2:2005; UNE-EN 12150-2:2005 ERRATUM: 2011; UNE-EN 12337-2:2006; UNE-EN 13024-2:2005; UNE-EN 14178-2:2005; UNE-EN 14179-2:2006; UNE-EN 14321-2:2006; UNE-EN 14449:2006; UNE-EN 14449 :2006/AC: 2006; UNE-EN 15682-2:2014; UNE-EN 15683-2:2014. | |
12 | Metal pipes and fittings for gas and water pipelines, and radiators. | UNE-EN 331:1998; UNE-EN 331:1999 ERRATUM; UNE-EN 442-1:2015; UNE-EN 1998/A1:2011; UNE-EN 1057:2007 + A1:2010; UNE-EN 14800:2008; UNE-EN 15069:2009. | |
13 | Structural and Device Support | UNE-EN 1337-3:2005; UNE-EN 1337-4:2005; UNE-EN 1337-4:2005/AC: 2007; UNE-EN 1337-5:2006; UNE-EN 1337-6:2005; UNE-EN 1337-7:2004; UNE-EN 1337-8:2009; UNE-EN 15129:2011. | |
14 | Tanks of steel. | UNE-EN 12285-2: 2005; UNE-EN 12285-2: 2005 ERRATUM: 2006. | |
15 | Isolating | UNE-EN 13162:2013 + A1:2015; UNE-EN 13163:2013 + A1:2015; UNE-EN 13164:2013 + A1:2015; UNE-EN 13165:2013 + A1:2015; UNE-EN 13166:2013 + A1:2015; UNE-EN 13167:2013 + A1:2015; UNE-EN 13168:2013 + A1:2015; UNE-EN 13169:2013 + A1:2015; UNE-EN 13170:2013 + A1:2015; UNE-EN 13171:2013 + A1:2015; UNE-EN 14063-1:2006; UNE-EN 14063-1:2006/AC: 2008; EN 14064-1:2010; UNE-EN 14303:2010 + A1:2013; UNE-EN 14304:2010 + A1:2013; UNE-EN 14305:2010 + A1:2013; UNE-EN 14306:2010 + A1:2013; UNE-EN 14307:2010 + A1:2013; UNE-EN 14308:2011 + A1:2013; UNE-EN 14309:2011 + A1:2013; UNE-EN 14313:2011 + A1:2013; EN 14314:2009 + A1:2013; UNE-EN 14315 -2:2013; UNE-EN 14318-1:2013; UNE-EN 14319-1:2013; UNE-EN 14320-1:2013; UNE-EN 14933:2008; UNE-EN 14934:2008; UNE-EN 15732:2014; UNE-EN 16069:2013 + A1:2015 | |
16 | |||
17 | gypsum products. | UNE-EN 13815:2007; UNE-EN 13950:2014; UNE-EN 14190:2014. | |
18 | Cover, ceilings, and walls. | UNE-EN 438-7:2005; UNE-EN 1013:2013 + A1:1015; UNE-EN 1873:2006; UNE-EN 13245-2:2009; UNE-EN 13245-2:2009/AC: 2010; UNE-EN 13964:2006; UNE-EN 13964:2006/A1:2008; UNE-EN 14509:2014; UNE-EN 14716:2005; UNE-EN 14783:2015; UNE-EN 14963:2007; UNE-EN 14964:2007; UNE-EN 15102:2008 + A1:2012 V2; UNE-EN 16153:2013 + A1:2015. | |
19 | Masonry. |
UNE-EN 1344:2015; UNE-EN 15037-4:2010 + A1:2014; UNE-EN 15037-5:2013. |
(*) The codes of the rules are indicated at the time of this publication (subsequent modifications may be made with respect to the year of publication). Revisions of the rules and additions, modifications, errata, etc. which may subsequently appear shall also be considered as being included for the purposes of the notification of the bodies.
TABLE 2
Grouping products and rules (for notification purposes)
Products by rating system 2 +
(These groupings correspond to the ones set out in the "Industrial Products Regulations Control Organisms" document. Accreditation by Product Groups. NT 42 ", from ENAC).
EVCP System Group 2 + | Name | Rules |
---|---|---|
1 | cales/pigments. | UNE-EN 459-1:2011; UNE-EN 12878:2007; UNE-EN 12878:2007 ERRATUM: 2008 |
2 | Factories masonry. | UNE-EN 771-1:2011; UNE-EN 771-2:2011; UNE-EN 771-3:2011; UNE-EN 771-4:2011; UNE-EN 771-5:2011; UNE-EN 771-6:2011 |
3 | Additives. | UNE-EN 934-2:2010 + A1:2012; UNE-EN 934-3:2010 + A1:2012; UNE-EN 934-4:2010; UNE-EN 934-5:2009 |
4 | Morters and aggregates. | UNE-EN 998-2:2011; UNE-EN 12620:2003 + A1:2009; UNE-EN 13043:2003; UNE-EN 13043 :2003/AC: 2004; UNE-EN 13055-1:2003; UNE-EN 13055-1/AC: 2004; UNE-EN 13055-2:2005; UNE-EN 13139:2003; UNE-EN 13139/AC: 2004; UNE-EN 13242:2003 + A1:2008; UNE-EN 13282-1:2013; UNE-EN 13383-1:2003; UNE-EN 13383-1/AC: 2004; UNE-EN 13450:2003; UNE-EN 13450/AC: 2004; UNE-EN 15368:2010 + A1:2011 |
5 | Concrete Prefabricated Products. | UNE-EN 1168:2006 + A3:2012; UNE-EN 1520:2011; UNE-EN 12602:2008 + A1:2014; UNE-EN 12737:2006 + A1:2008; UNE-EN 12737:2006 + A1:2008 ERRATUM: 2011; UNE-EN 12794:2006 + A1:2008; UNE-EN 12794:2006 + A1:2008/AC: 2009; UNE-EN 12843:2005; UNE-EN 13224:2012; UNE-EN 13225:2013; UNE-EN 13693:2005 + A1:2010; UNE-EN 13747:2006 + A2:2011; UNE-EN 13978-1:2006; UNE-EN 14843:2008; UNE-EN 14844:2007 + A2:2012; UNE-EN 14991:2008; UNE-EN 14992:2008 + A1:2012; UNE-EN 15037-1:2010; UNE-EN 15037-2:2009 + A1:2011; UNE-EN 15037-2:2009 + A1:2011 ERRATUM: 2011; UNE-EN 15037-3:2010 + A1:2011; UNE-EN 15037-4:2010 + A1:2014; UNE-EN 15037-5:2013; UNE-EN 15050:2008 + A1:2012; UNE-EN 15258:2009 |
6 | Chimneys/Tubes Hot air generators/generators. | UNE-EN 416-1:2009; UNE-EN 621:2010; UNE-EN 777-1:2009; UNE-EN 777-2:2009; UNE-EN 777-3:2009; UNE-EN 777-4:2009; UNE-EN 778:2010; UNE-EN 1020:2010; UNE-EN 1319:2010; UNE-EN 1457-1:2013; UNE-EN 1457-2:2013; UNE-EN 1806:2008; UNE-EN 1856-1:2010; UNE-EN 1856-2:2010; UNE-EN 1857:2013; UNE-EN 1858:2011 + A1:2011; UNE-EN 12446:2011; UNE-EN 13063-1:2006 + A1:2008; UNE-EN 13063-2:2006 + A1:2008; UNE-EN 13063-3:2008; UNE-EN 13069:2006; UNE-EN 13084-5:2006; UNE-EN 13084-7:2013; UNE-EN 14471:2013 + A1:2015; UNE-EN 14989-1:2008; UNE-EN 14989-2:2011 |
7 | Azeros/Electrodes/Bolts/Aluminium. | UNE-EN 1090-1:2011 + A1:2012; UNE-EN 10025-1:2006; UNE-EN 10088-4:2010; UNE-EN 10088-5:2010; UNE-EN 10210-1:2007; UNE-EN 10219-1:2007; UNE-EN 10340:2008; UNE-EN 10340 :2008/AC: 2008; UNE-EN 10343:2010; UNE-EN 13479:2005; UNE-EN 14399-1:2009; UNE-EN 14545:2009; UNE-EN 15048-1:2008; UNE-EN 15088:2006 |
8 | Geosynthetic/Geotextiles/Laminas Barriers Impermeable. | UNE-EN 13249:2001; UNE-EN 13249:2001/A1:2005; UNE-EN 13250:2001; UNE-EN 13250:2001/A1:2005; UNE-EN 13251:2001; UNE-EN 13251:2001/A1:2005; UNE-EN 13252:2001; UNE-EN 13252/Erratum: 2002; UNE-EN 13252:2001/A1:2005; UNE-EN 13253:2001; UNE-EN 13253:2001/A1:2005; UNE-EN 13254:2001; UNE-EN 13254/AC: 2003; UNE-EN 13254:2001/A1:2005; UNE-EN 13255:2001; UNE-EN 13255/AC: 2003; UNE-EN 13255:2001/A1:2005; UNE-EN 13256:2001; UNE-EN 13256/AC: 2003; UNE-EN 13256:2001/A1:2005; UNE-EN 13257:2001; UNE-EN 13257/AC: 2003; UNE-EN 13257:2001/A1:2005; UNE-EN 13265:2001; UNE-EN 13265/AC: 2003; UNE-EN 13265:2001/A1:2005; UNE-EN 13361:2005; UNE-EN 13361:2005/A1:2007; UNE-EN 13362:2006; UNE-EN 13491:2005; UNE-EN 13491:2005/A1:2007; UNE-EN 13492:2006; UNE-EN 13492:2006/A1:2007; UNE-EN 13493: 2006; UNE-EN 13707:2005 + A2:2010; UNE-EN 13956:2013; UNE-EN 13967:2013; UNE-EN 13969:2005; UNE-EN 13969:2005/A1:2007; UNE-EN 14695:2010; UNE-EN 15381:2008; UNE-EN 15382:2013 |
9 | Wood structures. | UNE-EN 13986:2006 + A1:2015; UNE-EN 14081-1:2006 + A1:2011; UNE-EN 14229:2011; UNE-EN 14250:2010 |
10 | Systems for protection and repair of structures/adhesives. | UNE-EN 1504-2:2005; UNE-EN 1504-3:2006; UNE-EN 1504-4:2005; UNE-EN 1504-5:2004; UNE-EN 1504-6:2007; UNE-EN 1504-7:2007; UNE-EN 15274:2015; UNE-EN 15275:2015 |
11 | Bituminous mixtures. |
UNE-EN 12271:2007; UNE-EN 12273:2009; UNE-EN 12591:2009; UNE-EN 13108-1:2008; UNE-EN 13108-2:2007; UNE-EN 13108-2:2007/AC: 2008; UNE-EN 13108-3:2007; UNE-EN 13108-3:2007/AC: 2008; UNE-EN 13108-4:2007; UNE-EN 13108-4:2007/AC: 2008; UNE-EN 13108-5:2007; UNE-EN 13108-5:2007/AC: 2008; UNE-EN 13108-6:2007; UNE-EN 13108-6:2007/AC: 2008; UNE-EN 13108-7:2007; UNE-EN 13108-7:2007/AC: 2008; UNE-EN 13808:2013; UNE-EN 13808:2013/1M: 2014; UNE-EN 13924:2006; UNE-EN 13924:2006/1M: 2010; UNE-EN 14023:2010; UNE-EN 15322:2014 |
(*) The codes of the rules are indicated at the time of this publication (subsequent modifications may be made with respect to the year of publication). Revisions of the rules and additions, modifications, errata, etc. which may subsequently appear shall also be considered as being included for the purposes of the notification of the bodies.