Key Benefits:
In compliance with the provisions of Article 11 (f) of the Infrastructure Regulation for Industrial Quality and Safety, approved by Royal Decree 2200/1995 of 28 December 1995 ("BOE" of 6 February 1996), and having regard to the case for annulment of the rules submitted by the Spanish Association for Standardisation and Certification (AENOR), an entity designated by the Order of the Ministry of Industry and Energy of 26 February 1986, according to the Royal Decree 1614/1985, of 1 August, and recognized by the Additional Provision of the aforementioned Royal Decree 2200/1995, of December 28.
This Directorate General has resolved to publish in the "Official State Gazette" the relationship of Spanish rules UNE cancelled during the month of February 2012, identified by its title and numerical code, which is listed as an annex to the Resolution.
Madrid, April 9, 2012. -Director General of Industry and Small and Medium Enterprises, Manuel Valle Muñoz.
ANNEX
Rules nullified in the month of February 2012
Title | ||
---|---|---|
1066:1991. |
1068:1981. | |
International Unification of Notions and of the terms | ||
1070:1979. | Vocabulary of the terminology. | |
1073:1983. | Lexicographic symbols specially used in vocabularies systematic with definitions | |
53411:1986. | Plastics. Sheets of chlorinated polyethylene without armor for the waterproofing of buildings. Test features and methods | |
53419:1989. | Plastics. Determination of the strength of the union between plasticised poly (vinyl chloride) sheets used in waterproofing | |
53621:1989. | Elastomeres. Cold-applied elastic two-component polymeric materials for sealing joints in concrete pavements. Test features and methods | |
53622:1989. | Elastomers. Facade gasket sealing materials. Test features and methods | |
53623-9:1989. | Elastomers. Gasket sealing materials between construction elements. Determination of plasticizer migration. Filter paper method | |
53623-10:1990. | Elastomers. Gasket sealing materials between construction elements. Determination of plasticizer migration. Concrete color change method | |
104243:1990. | Impermeable. Modified bituminous and bituminous materials. Polymer modified bitumen extruded sheets | |
104304:2000. | Synthetic materials. Put into play. Determination of the strength of the weld by peeling between installed synthetic sheets used in waterproofing | |
104481-2:1992. | Waterproofing Membranes. Slip resistance test | |
104481-3-1:1992. | Waterproofing membranes. Solapo sealing test by the pressure vessel method | |
202003-13:2003 IN. | Electrical material for gas atmospheres explosive. Part 13: Construction and use of rooms or buildings protected by pressurization | |
UNE-CLC/TS 50131-3:2005 V2. | Alarm systems. Intrusion alarm systems. Part 3: Control and signaling equipment | |
UNE-EN 50143/A1:2003. | Cables for light-discharge pipes and signals operating at an empty voltage greater than 1 kV without exceeding 10 kV. | |
UNE-EN 50143:1997. | Cables for signal and pipe installations Light discharge operating at a vacuum voltage greater than 1 kV without exceeding 10 kV | |
UNE-EN 60317-30/A1:1999. | Specifications for particular types of threads for electromagnetic coils. Part 30: Polyimide glazed rectangular section copper thread, class 220. | |
UNE-EN 60317-30:1996. | Specifications for Types Particular yarns for electromagnetic coils. Part 30: Polyimide glazed rectangular section copper thread, class 220. | |
UNE-EN 60317-30:1996/A2:2006. | Specifications for Types Particular yarns for electromagnetic coils. Part 30: Copper thread of rectangular section enamelled with polyimide, class 220. (IEC 60317-30:1990/A2:2005) | |
UNE-EN 61300-2-23:1998. | Optical fibre interconnect devices and passive components. Basic tests and measurement procedures. Part 2-23: Essays. Sealing non-pressurized splice boxes of fiber optic devices | |
UNE-EN 61386-1:2005 ERRATUM: 2010. | Tube systems for the cable management. Part 1: General requirements | |
UNE-EN 61557-9:2001. | Electrical safety in low voltage distribution networks up to 1000 V in c.a. and 1500 V in c.c. Equipment for testing, measuring or monitoring protective measures-Part 9: Isolation defect location devices in IT networks | |
UNE-EN 80416-1:2003. | Basic principles for graphic symbols usable in the equipment. Part 1: Creating graphic symbols | |
UNE-EN ISO 9455-12:1996. | Foundations for soft welding. Test methods. Part 12: Steel tube corrosion test. (ISO 9455-12:1992) |